@ARGamingPK1 I tried that but it is still the same. I also configured the deco back to AP mode after switching that and it is not working.

@David-TP the only way to temporary restore connectivity on the PS5 is: Turn OFF PS5 Power off Deco Power off ISP modem Wait 2 minutes Power ON modem → wait fully up Power ON Deco → wait fully up...

I was able to change the IP address, but the issue remains the same. The PS5 successfully gets an IP assigned, but it cannot access the internet. There seems to be something else going on here. Is...

The main deco ip address is 192.168.1.3 The 2 satellites are 192.168.1.6 & 192.168.1.7. Subnet Mask: 255.255.255.0 As the deco is running on AP mode, I can not change the ip address of it.

It didn’t work. Yesterday it started failing again. When I unplugged the BE25 from the ISP modem, the PS5 started working (both via Ethernet and the modem’s Wi-Fi). There is definitely a DHCP-related...

Updating the thread for future reference. I hope this helps others. The Deco BE25 is connected to the ISP modem (which I replaced today, as I initially thought it might be causing the conflict)....