@Solla-topee I had tested it by setting up a second network using only that DECO, but it wasn't assigning an IP address to the laptop I connected to it. I took the test without an internet...

@Solla-topee I just tested the problem deco in isolation and it does not distribute the IP. Reset and configure it does without problems but it works it does not work.

@Solla-topee I rolled back all my routers to version 1.3.0, but whatever stopped working still doesn’t work. And it all started because of the 1.3.2 update. I now have two routers, but after this...

@Solla-topee Internet deco -> Switch Hi-K0502WS -> other 2 decos with only 1 working. Yes, it has an IP address but can't use the network. It tries to access the internet, succeeds rarely, but...

@Solla-topee I also had trouble with this update. My local network stopped working, and I had to set it up from scratch. But even so, out of the three Deco BE65 units I have, only two are working....

@David-TP I tested the firmware and it fixed the IPv6 issue. Thanks for the solution!