As a half-baked remedy you could try setting up a ping watchdog rule on the repeater-CPE to ping the AP's IP and reboot when it fails to get 2-3 replies after 5 mins each (given that it probably...

R1D2 wrote Ok, I will try to reproduce with a CPE210 if the repeater test has finished, but just to be sure: are you really changing the BSSID (= MAC address) or the ESSID (= WiFi network name)? And...

all static

Are we really suggesting that repeater / bridge mode on these CPEs works as such (i.e. expires every 48hrs)!?

Model : Hardware Version : Firmware Version : ISP : Hey all, so this happened today to an old 'ARP-unlocked' v1.1 CPE that I've put on my testbed again, having changed it's setup from STA-CL to...

Hm...I usually manage ~30dB over distances of ~1.5km on CPE510s. Seeing that you' re **only** getting 30+dB sitting on a 0.2km link are you sure you've orientated the CPEs properly? This is...