RTourisLV3Online
Following: 1Followers: 4
Forums/ Pharos Wireless Broadband
2020-06-15 20:43:59
Gigabit passive (24v) PoE adapters to 100mbps ethernet CPEs compatibility considerations
In an effort to further populate a single-CPE mast configuration with additional directional units using existing wiring infrastructure I thought of going down the PoE switch route. However having...
0HELPFULS
Forums/ Pharos Wireless Broadband
2020-01-22 20:39:40
Re:WBS210 usable as a normal AP with 2 omni antennas?
MCS7 was proposed to limit spatial streams down to a single one so as to perhaps narrow down the cause of the aforementioned issue. It didn't seem to pay any dividents. On the MIMO antenna I'd say...
0HELPFULS
Forums/ Pharos Wireless Broadband
2020-01-22 19:12:50
Re:WBS210 usable as a normal AP with 2 omni antennas?
@McLovin Indeed...sorry but there's no other possible solution crossing my mind right now...could be due to detachable antennas spec? Are these definitely for use in the 2.4Ghz band? I've sucrssfully...
0HELPFULS
Forums/ Pharos Wireless Broadband
2020-01-22 18:45:42
Re:WBS210 usable as a normal AP with 2 omni antennas?
@McLovin weird...perhaps if you chose a different channel then? I'm also seeing the Tx still @15dBm, did you try lowering it all the way down to 1dBm?
0HELPFULS
Forums/ Pharos Wireless Broadband
2020-01-22 14:37:39
Re:WBS210 usable as a normal AP with 2 omni antennas?
Let's try disabling 'auto' in distance settings and set it manually to something along the lines of either 0, or 0.01 - you be the judge as at the moment it's automatically set to 400m and at the...
0HELPFULS
Forums/ Pharos Wireless Broadband
2020-01-22 12:26:15
Re:WBS210 usable as a normal AP with 2 omni antennas?
No worries. Please post a screenshot from your actual setup page when you get the chance if you don't mind. There's some things in the WBS series that's different from the CPEs and the emulator...
0HELPFULS
123...29