Early Access Closed-Pre-release Firmware for Archer AX55 V1 1.3.3 Brings a Host of New Features and Optimizations
Sep. 26th 2024 Update:
The trial period for the beta firmware has ended, and we will continue to address the ongoing issues.
Please keep an eye out for the official firmware release. If you encounter any new problems, please Start a New Thread to provide feedback.
This Article Applies to:
Archer AX55 V1/1.6
We are pleased to announce the pre-release of the Archer AX55 firmware update, version V1.3.3. This update introduces a range of new features, optimizations, and enhancements designed to improve your network experience and add new capabilities. Here's an overview of the key updates:
New Features:
1. EasyMesh R2 AP Bind and Client Bind:
Simplified network management with the ability to bind specific clients to designated access points.
2. EasyMesh R2 CAC Functionality:
Improved channel access control for better network stability and performance.
3. Support One-click setup for Third-Party VPN Support:
Support third-party VPNs directly through the Tether app for enhanced ease of use. Currently we support Nord and Surfshark.
For more detail better check this link: Get a top-class VPN! | TP-Link
4. Support exception clients and whitelists websites in web protection
5. Support simple configuration of HomeShield through the web UI.
6. Tether - WAN Real-Time Rate Display:
Tether - Signal Strength Display in Client List:
Monitor WAN connection speeds in real-time through the Tether app. View signal strength information for connected clients directly in the Tether app.
7. Satellite Web - HTTPS Configuration:
Secure your satellite web interface with newly added HTTPS configuration options.
Firmware Download
Before the Upgrade
(1) Please be sure you have read the Beta Test Agreement before upgrading the Pre-release firmware!
(2) For the sake of insurance, it's always recommended to save a copy of the router Backup Config file before upgrading or downgrading.
(3) You may follow the guide to upgrade the firmware of your router. How to Upgrade the Firmware on the TP-Link Wi-Fi Routers.
Direct Firmware Download Link
Additional Information
As always, we value your feedback. If somehow you encounter an issue during or after the router firmware upgrade, it's suggested to comment below with the following info. Your input helps us continue to improve and provide the best possible products and support.
• Model, hardware version, and firmware version of your router.
• Detailed issue description, and provide more information on the specific conditions that seem to trigger the problem.
Update Log
August 9th, 2024:
Release of the post
September 26th, 2024:
Close this thread
Related Article:
EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller
New Firmware for Archer AX55 V1 Supports DoH&DoT, ECO Mode, EasyMesh in AP Mode and More
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
I'm not in any way related to the company "TP-Link" - I'm just another end user - so my posts are not "official".
BUT if you visit the Polish support section:
https://www.tp-link.com/pl/support/download/archer-ax55/v1/#Firmware
and try to download the official Polish firmware images - you will get standard EU versions (pretty outdated - but never the less).
I have tried to binary compare various unzipped firmware images from TW/EU/CA and they are all identical. This means you should be able to use the 1.3.3 pre-release since it does not differ from the EU version nor the CA or TW versions.
I hope this helps and please inform us about the Satellite client issue mentioned above (Master AP cannot see Satellite clients when running in Ethernet Backhaul mode)
Thanks
zEnterHacker
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hi, thanks for sharing problem here.
I have reported your feedback to the senior engineering team. They will take further research. And I will be back once there is any update.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Circuit Breaker
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Dear Marvin, thank you for spending hours on firmware that brings new issues instead of solving existing ones. I bought Archer AX55 Pro a month ago hoping to get powerful hardware with latest tested features including more reserved IP's than Archer VR2100 I had in that days.
Yes, my wish related to more reserved IPs was fulfilled but since installation I'm thinking if I'd spent my money good way.
Internet connection via GPON so RJ45 but I was not able to make it working when set dynamic IP address for internet as it is defined by provider. After hours of fails I gave up and set static IP by the same values as gived by DHCP. Miracle happened, internet started working. I tried once or more times to switch to dynamic IP as required by provider but internet got lost until I changed back to static IP. Horrible. It was smoothly working using Archer VR2100.
Old Archer VR2100 also allows to save syslog to remote server based on filled IP and details. Very useful, saved to my Synology all logs to can check in one place what happened. I haven't found this option for Archer AX55 Pro in router's web administration, nor in Tether app. Why it was removed? Was it soooo boring or complicating to keep it? The same for security log. Is there something that must not be analysed outside Archer?
And another weird difference - old Archer allows to import own certificate that will be used for remote access to router. I haven't found this option for Archer AX55 Pro that's why appears warning about missing certificate - annoying, especially when I have certificate but have no way how to punch it into Archer AX55 Pro. And the cherry on top of the cake is that I cannot uncheck HTTPS protocol to be used for remote access, it's mandatory to be allowed. If Franz Kafka would live, he will be flapping and laughing how good students in tp-link he has.
Facing these annoying details is inconsistency in rules for naming connected DHCP clients between Tether app and web administration quite not surprising.
Yes, I bought Archer AX55 Pro also due Tether app as I was missing such easy going remote access to my home LAN when I'm far away. Childish, I agree. If I'd count also nearly one year promised and never fulfilled correction of firmware of tapo cams, maybe this is the right time to request money back from seller, learn to make working linux replacements like pi-hole @ rpi5 and say goodbye! to tp-link.
Have a nice day.
O.
- Copy Link
- Report Inappropriate Content
I have experienced something like that (DHCP for WAN port) - but on a standard AX55 (not identical with your Pro version).
I fixed it by keying in DNS server (8.8.8.8 and 8.8.4.4 if you are a fan of google ;-) . I could not key in DNS servers for the WAN connection in DHCP mode, so I turned ON the internal DHCP server (for WiFi clients) and put in valid DNS servers there, saved the setting and afterwards turned my DHCP server back to "Auto" and my WAN connection into the ISP provider required DHCP mode - this way valid DNS servers showed up there and will be used by the AX55 to ping various known URLs and hence showing "good" internet Icon.
I have to be honest here. I have not re-checked this problem on later firmwares and I'm not sure you can compare firmware for AX55 with AX55 Pro - but you could give it a shot - it did work for me. Also my AX55's are not directly connected to any ISP since they are behind a hardware firewall taking care of protecting the entire network and acting as DHCP server for all clients - so my AX55 are all in access point mode.
Btw. Saving syslog to local server or or e-mailing can be done in the AX55 via WEB GUI "Advanced | System | Syslog" - OK I had to zoom out to 90% for the relevant buttons to appear - don't know why that scroll-bar was missing :-)
Best regards
zEnterHacker
- Copy Link
- Report Inappropriate Content
On a sidenote, is it by any chance possible to get some more performance out of the USB3 port on this gear? Granted not looking forward to 5gbps levels per USB3 spec, but I'd be happy with at least doubling the existing 30MB/sec (240mbps) I get out of this which is on par with the USB2 spec. Surely there's some headroom there; I mean otherwise you'd probably just stick with a normal USB2 connector, right? right? ;)
- Copy Link
- Report Inappropriate Content
Information
Helpful: 1
Views: 8450
Replies: 49