Building on top of your previous trick of using two browsers you may want to try out this, it's going to blow your mind. Use just one browser (yeap, one)...follow the usual procedure to log-into the...

+1 at using two different browsers, hadn't thought of that! So it is indeed something that could be solved on a software basis, one can only hope. I'm also sometimes getting a message to save changes...

Model : Hardware Version : Firmware Version : ISP : So I've configured two of my current CPEs on this link I'm testing to be accessible remotely (off-site) by forwarding their server TCP ports...

I'd try lowering the MCS mode down a notch, perhaps to MCS7/12 in both ends of the link just to give a couple of dB the chance to kick in and take that max tx rate closer to the actual rate...

...so given the fact that I'm actually facing a similar issue over the last couple of days whereas my 2 CPE510s used to be rock solid for quite some time beforehand I'd feel inclined to bring up an...

I was in the exact same situation a few weeks ago until i figured it out. So assuming you have 2 CPEs, having assigned static IPs first one is for example 192.168.1.11 and the second 192.168.1.12....