@Dezinn Hi, for this issue, you could also refer to the solution in this thread: Archer AX53 V1 and Archer AX72 Pro V1 IoT Network Config Lost after Reboot

This Article Applies to: Archer AX53 V1 with firmware version 1.2.2 Build 20230627 Archer AX72 pro V1 with firmware version 1.2.2 Build 20230831 Phenomenon Description: Some users have reported that...

@Dezinn Hi, please try changing it back to Router mode first, then reset the device to factory defaults and then configure it to AP mode again manually to see if the issue can be resolved this way....

@Vintage-MR600 Hi, you could follow this guide to set up wireless router mode on MR600: How to set up Wireless Router mode and 3G/4G Backup on TP-Link LTE Gateway Note: if you do not want to use 4G...

@ReelReal Upon checking, your current firmware version is for Archer MR600(PLORG) 3.0, which is for ISP Orange in Poland, thus it cannot install other EU version firmware. If you use Orange SIM card,...

@Curtisw Please follow this guide to choose correct operation mode for TL-WR092AC and then set it up accordingly: How to choose the right working mode for the Nano pocket routers