@Helttod We can do some troubleshooting first to locate this issue and try to fix it. When the speed goes down to 4Mbps, please click here to get the wired negotiation speed. Note: The steps are the...

@lord-kyron The beamforming is enabled by default. If you want to use MU-MIMO, you can enable it first, and then enable smart connect; Then it will work when you connected to the 5GHz. We tried to...

@karak0206 Only when you select Authentication, do you have to enter the User Name and Password in the following fields; you can disable it and test whether the auto mail feature works proprly. Still...

@Tybs Thanks for your requesting, the Archer C50 adn C60 can handle 30+ devices simultaneously; while it is recommended to connect no more than 15-20 devices to ensure the performance. With more...

@Zaphod66 The pause/play button indicates the current internet access status of the corresponding profile, so it is normal. When the pause button shows up, that means all the devices in this profile...

@horace_vr You need give TL-WR1043ND a different IP address but it still should be in the same subnet, In other word, if the Archer C2 uses 192.168.0.1, you can give 192.168.0.100 to the wifi-to lan...