TriuneTechAZLV1Online
Following: 0Followers: 0
Forums/ Switches
2020-04-08 15:48:45
Re:TL-SG1016DE Easy Smart - Cascade issue
Happy to provide the diagram ... +----------+ +----------+ +----------+ | router |---------------------| 1016DE|--------------------| 1016DE| +----------+ +----------+ +----------+ | | | | | |...
0HELPFULS
Forums/ Switches
2020-04-07 16:17:40
Re:TL-SG1016DE Easy Smart - Cascade issue
They are interconnected by a single CAT5e cable. They are running the latest firmware. I even Factory Reset them after the firmware upgrade. They have been IP'ed to 10.x.x.2 and 10.x.x.3. I've tried...
0HELPFULS
Forums/ WiFi
2020-04-06 18:31:50
Re:EAP245, OC200, and DHCP
@TriuneTechAZ I was able to resolve the problem. I had mistakenly set VLAN 1 to Tag in the OC200. Once I removed the VLAN setting from the associated SSID, violla!
0HELPFULS
Forums/ Switches
2020-04-06 18:27:55
TL-SG1016DE Easy Smart - Cascade issue
I have 2 TL-SG1016DE v3 Easy Smart switches. I want to use 1 to feed the first floor and 1 to feed the second floor. But when I connect these 2 switches together they create some type of broadcast...
0HELPFULS
Forums/ WiFi
2019-06-26 23:42:36
Re:EAP245, OC200, and DHCP
It is a very strange issue. The DHCP server is the main firewall, Netgear SRX5308. No captive portals are activated. The Guest Network is NOT selected on the "Guest" network. Have not done a packet...
0HELPFULS
Forums/ WiFi
2019-06-26 18:32:32
EAP245, OC200, and DHCP
I have a system in place with 6 total AP's all of which are EAP245's. Two are v3 hardware, four are v1 hardware. They are all controlled by an OC200 Omada controller. There are 2 basic SSID's carried...
0HELPFULS
12