GercoLV1Online
Following: 0Followers: 0
Forums/ Switches
2023-12-04 20:32:04
Re:TL-SG3428x 1.0 / two device connected at 10Gb but data transfer sufficates
@Clive_A Hi Clive, Thank you for your extensive reply. You've given me quite a bit to look into, which I will. However, since I am 'playing around' with my two servers with my crucial data on it, I...
1HELPFULS
Forums/ Switches
2023-12-03 21:39:00
TL-SG3428x 1.0 / two device connected at 10Gb but data transfer sufficates
Hi I recently bought this 3428x switch two transfer data between two Hp Proliant ML 310e servers (one is master, other is slave, a spare copy). Both these servers have a HP Ethernet 10Gb 2-Port...
0HELPFULS
Forums/ Routers
2021-08-18 08:07:37
Re:SFP modules won't communicate with each other
@Libik That's what I understood indeed, maybe my reply was not clear enough on this. I have spoken with the company I bought the network stuff from and both them and me guess we have a pretty...
0HELPFULS
Forums/ Routers
2021-08-17 07:23:36
Re:SFP modules won't communicate with each other
@Somnus Thank you for your reply. I fear that this is indeed the case. I am not sure if I can find two SFP modules of the same brand since one device is a TP-link and the other a Netgear. The manual...
0HELPFULS
Forums/ Routers
2021-08-15 21:14:25
SFP modules won't communicate with each other
I have connected my T1700G-28TQ to a Netgear ProSafe GS716T through SFP / fiber. I am using the SFP module TL-SM311LM in the TPLink switch and the SkyLane SFP85P55GE0B989 Rev A SFP module in the...
0HELPFULS
Forums/ Deco
2020-01-04 08:06:56
Re:Creating network using wired connections
@Kevin_Z Hi Kevin, Thank you very much for your reply. It does help! I have put the ISP modem in bridge mode and connected one M9 directly to this ISP modem. This M9 is in Router mode and connected...
0HELPFULS
12