@CMB88 Are you able to log into the XS1930-10? If yes, then you could go through all the menus and check what options they have configured on the switch. We can't rule out that they may have...

@CMB88 Hi, As you say this seems overly complicated. Can you ask your ISP why you can't just connect your BE800 to the XS1930-10 via Ethernet cable? I can't see any benefit of connecting the two via...

@HkSherwani Hi, To be able to use band 4 you would need to obtain an RE200 whose serial number label reads "Model: RE200(US)". The designated region can only be set in the factory. It can't be...

@Sukitansee Hi, Theoretically it should work after you have configured the Internet connection settings of the AXE75 as per the section "What settings should I use for a fibre router that's connected...

@woldsweather It depends on what you are trying to achieve. Is your goal to discard the Plusnet router altogether and replace it with the Archer AX55 or are you keeping the Plusnet router and just...

@Uk_pete_2000 Hi, Try if the following method works. 1. Verify EasyMesh is switched on in the settings of the NX200. 2. Switch "Band Steering" off on the NX200. (for the location of this option refer...