@SmilerIan That wholly depends on the particular client device. There have been posts from users here who said they own client devices that switch just fine between non-Mesh APs with the same SSID...

@SmilerIan Hi, You can enter the same SSID in the RE705X that is used by the Vodafone Power Hub, but the RE705X cannot form a Mesh network with the Vodafone Power Hub and therefore cannot assist the...

@Kiezelke Hi, The routers BE550 V1/V2 and AX73 V1/V2 all support EasyMesh via Ethernet Backhaul. So you should be fine. https://community.tp-link.com/en/home/forum/topic/593722 By the way, are the...

@Reginald_VDB Hi, In general, only Deco devices mesh with Deco devices. TP-Link's non-Deco products use incompatible Mesh variants. I guess your best bet for your network extension would be another...

@Parker00786 Hi, If you are seeing the Wi-Fi symbol shown in the picture below, then the problem should not be related to IP allocation. In my experience this is usually a sign of issues with the...

@BT2026 I've just noticed that the firmware download for version V6 of the TL-PA4010P KIT contains a completely different firmware than previous versions of PA4xxx Powerline adapters. That means V6...