Powerline Adapters
The Powerline Adapters are mainly designed to extend your network to any room via existing power line. They are quite easy to setup while the transmission is stable and fast. In this section you can say hello to other members, ask, answer or discuss technical topics regarding Powerline Adapters.
Powerline Adapters
Hi Since installing MacOs 27 my tpPLC utility doesnt work despite installing Rosetta as recommended by Apple. With the next Mac release 28 even with Rosetta the utility wont work, is anyone else havin
0Helpful
72Views
Not so much a problem with the Powerline device - but a heads up about the MacOS version of tpPLC used to manage them. The downloadable version of tpPLC was created for an old MacOS version, and only
2Helpful
1089Views
Hello TP-Link Support, I have a TP-Link PG2405P KIT (FR), hardware version V1, currently running firmware 1.1.0 Build 20250717. Since updating the firmware, I have noticed lower and less stable perfor
0Helpful
27Views
Hi Guru's after power cut and power all restored. TP-Link powerline devices have power. I can connect via WiFi but once connected , no internet connection. Tried power off router and power line. Power
Network Connectivity
By
Numpty-AWH1
· Latest post Sunday
by woozle
0Helpful
77Views
Hello, I own the Powerline 7017P. After many attempts and adjustments (power saving off..etc), I managed to get a stable connection, but it isn't fast. Around 20/30 Mbps on a 100 Mbps connection. I’ve
0Helpful
167Views
I successfully paired WPA8631P (ethernet cable) - all 5 lights on solid green and PA8010 (no ethenet cable) power and powerline buttons on green- both in wall sockets in the same room. The problem is
0Helpful
125Views
Hi increased broadband speeds and they (ZZOOMM) upgraded me to a WiFi 7 router. All sorts of issues, but turns out my powerlines being v3 (one mesh) and the WiFi 7 router supports easy mesh. So just l
EasyMesh
By
Numpty-AWH1
· Latest post 3 weeks ago
by Numpty-AWH1
0Helpful
221Views
How to get tpplc app to recognise two different pairs of powerline adapters on two disconnected electrical networks but sharing the same LAN? I have more than one type which is why I can't complete ha
Network Connectivity
By
ISavedNoKat
· Latest post 3 weeks ago
by woozle
0Helpful
147Views
Everywhere it states that this PLC kit is compatible with EasyMesh but when I enter the settings there is only OneMesh option and it says my router (ZTE F6705) it's not compatible with EasyMesh when i
EasyMesh
1Helpful
260Views
I bought the TP-PA7017 to connect my PC via LAN. My internet box is quite close to me. My internet connection is 100MB, and I bought it expecting the same speed, or maybe a little more. It turns out t
Network Connectivity
0Helpful
274Views
i bought the tl-pa7017p kit today and it arriverd. i connected as i was instructed on the user guide and this does not work up to standard at all. before i bought the kit when i ran speed tests i woul
1Helpful
279Views
Dear TP-Link Support Team, I am reaching out to request technical support and a potential warranty review for a hardware failure involving one of the adapters from my G.hn2400 Passthrough Powerline Ki
Network Connectivity
0Helpful
235Views