@GiantHogweed The default LAN IP address of the AX11000 is 192.168.0.1, which means you should not need to worry about point 7. Point 8 refers to what TP-Link calls "Connection Type: Dynamic IP",...

@Saloufas 1030.52.424.2025 also came via Windows Update a couple of months ago, hence I don't have a download link.

Hi, Just a bit of additional information. In general, the logic on current models of TP-Link's Archer routers with up-to-date firmware is that when Remote Management is enabled, then port 80 is used...

@miliotacos I don't see how any setting stored in the CMOS could lead to a PCIe card being detected randomly. But if you are familiar with BIOS settings, then just go ahead, reset the CMOS and after...

@miliotacos Hi, Looks like you have already tried everything that there is to try. By the way, when the T2E is installed in the PCIe slot, do the golden contacts of its PCIe connector completely...

@Saloufas Hi, I had a look into the Optional Updates section of my Windows and saw I was also offered the 1030.52.731.2025 driver. So I decided to give it a try. The result is that version...