@Pascalcreases Hi, According to the datasheet for the Archer C60 V3 it only supports VPN Server, but it has no VPN Client functionality....

@paulrob Please open the Device Manager again, right-click the "RTK Driver Storage USB Device" and select "Properties". In the Window that opens there should be a message shown under "Device status"....

@GiantHogweed The default LAN IP address of the AX11000 is 192.168.0.1, which means you should not need to worry about point 7. Point 8 refers to what TP-Link calls "Connection Type: Dynamic IP",...

@Saloufas 1030.52.424.2025 also came via Windows Update a couple of months ago, hence I don't have a download link.

Hi, Just a bit of additional information. In general, the logic on current models of TP-Link's Archer routers with up-to-date firmware is that when Remote Management is enabled, then port 80 is used...

@miliotacos I don't see how any setting stored in the CMOS could lead to a PCIe card being detected randomly. But if you are familiar with BIOS settings, then just go ahead, reset the CMOS and after...