Forums/
Switches
2024-01-14 10:42:24
Removing LAG leaves ports unusable
Hi. I have configured 3 LACP teams via Omada Software controller on an SG3428X v1. Now, I removed team 2. Team 1 and 3 continue to work properly, but the former ports of team 2 are now unusable. Disab
Forums/
Controllers
2023-06-12 09:15:51
Re-adoption of old T1500G-8T v2.0 fails
Dear all. I used to manage two old T1500G-8T v2.0 switches via Omada Software controller. And although they are not listed as supported devices any more, it was still working. Now, I needed to reconfi
Forums/
Requests & Suggestions
2023-05-16 09:56:54
Traffic interruption after Omada Update
Hi. After updating Omada Software Controller, it automatically readopts and reconfigures all switches and AP. During this adoption/configuration phase, the switches do not forward anything. Although t
Forums/
Switches
2023-03-09 20:56:25
TL-SG3428X Firmware Update not possible
Hi , i cant update the Firmware to last Versions I buyed the Switch from Amazon last Year . On the switch is the Firmware Version 1.02 preinstalled . I tried to Update the Firmware to Version TL-SG342
Forums/
Switches
2023-02-05 17:16:01
VOIP only working sporadically
Hi. I used to run a Swissvoice CP2505G VOIP phone directly connected to a FritzBox 7490. The setup worked fine. To power the phone via POE I placed the SG2008P in between. Since then, the phone only s
Forums/
Switches
2023-02-04 23:35:49
Total Amateur with basic switch set up question
Does the switch (TL-SG108PE) require a router between it and the cable modem? It was my understanding that I could connect the switch directly to the cable modem thus getting internet to the switch. A