This was reported on my repo for the container image I build. This is happening for both the beta and GA versions of 5.14.x: both of the latest beta versions, 5.14.0.11 and 5.14.20.9 and the 5.14.26.1

Team, Due to some typo in changing the IP adres of a switch (model SG3428X) I have lost acces to the webui. I then tried two Cisco console cables for doing a factory reset - no such luck. Is there ano

Team, I'm strugling with the L3-switching/routing capabilities. According to the specs this is expected to work for the given switch model. Meaning there is no Omada router involved with large volumes

Team, I'm looking for an ACL rule that limits VoIP traffic from a specific external source IP and a specific internal destination port. While realizing that the return path is vice-versa => I expect a

Team, I have a customer who is using 6 of these ER605-V2 routers. We can not get DNS working on all 6 - even with just one additional vlan (beside the default management vlan 1). The things we tried:

Team, The spec-sheet of the SG2218 says "Static Routing: 32 IPv4/IPv6 Static Routes". What exactly does this mean? For example can I use this to route traffic between 2 vlans? And if yes - how would I