I am the owner of four VIGI C250 4mm cameras. Due to a degradation in image quality, I noticed that there was a significant amount of dust inside the dome, despite the cameras being waterproof. I clea

Hello. We have a private network (172.16.xx.xx) that we use for devices around the city. In some places we use a cpe510, programmed as an AP, connected to this network at the end of an area. Then we h

3 story house. There are two EAP610 and one EAP670 on the ground floor, one EAP610 on the first floor, one EAP610 on the second floor. Have two solar microinverter on the roof. They should connect to

First post. Just installed the ER605 and controller. For the life of me I can't find Firewall rules on this controller. I see just firewall settings (basically timeouts) and "Attack defense". What am

Hi, My customer is required me to do continuous recording and event recording at the same day and time frame. For example, it shall start at 0000 and end on 2359hrs. Main stream set at 1080P, 25ips an

I have two CPE610 antennas. On the AP side, Port0 shows 100Mbps - FD, but on the client side, Port0 shows 10Mbps - FD. I checked with different PoE adapters and LAN cables, but the result is the same.