Feature Request (Routers)
1
VotesHello TP-Link Team, I’d like to request a firmware update for the Archer BE230 that includes WISP mode and TR-069/CWMP support. These features would significantly enhance the router's usability for bo
WISPIPv6MLO Network
127Views
0
VotesThe bandwidth meter (Upload and Download) on the BE800 (And probably other routers) counts only IPv4 traffic. With IPv6 being more and more commonly used, it should be included. In fact, the bandwidth
IPv6
85Views
3
VotesI currently have the VPN client configured using OpenVPN. I have my XBOX console enabled for VPN access. Since I also have IPV6 enabled on my router (Internet and LAN) all clients automatically receiv
VPNIPv6Firewall
218Views
1
VotesOn the routers which do support IPv6 firewall rules today, the implementation is not ideal. This is because most ISPs cycle IPv6 delegated subnets regularly, which make the rules invalid. Some ways to
IPv6Firewall
By
slyronit
64Views
4
VotesHardware version: 1.20 Good evening, it is with great surprise that I write this post, as IPv6 is becoming more and more common, and even necessary due to ISPs resorting to CGNat to deal with the scar
IPv6IPv6 Firewall Rules
215Views
1
VotesMy ISP gives dynamic public ipv6 and private ipv4, hence I have to enable IPV6 feature, and add IPv6 Firewall Rules to allow public connection to one of the device in the network, with the help of ddn
IPv6IPv6 firewall
By
jeffery-tan
· Latest post 2025-02-03 10:59:10
by slyronit
250Views
0
VotesHi. I have setup my router including IPV6. IPV6 address is obtained thru common Ppoe connection with Ipv4. Using Slaac+stateless dhcp the router at start correctly does not send DNS (IPV6) info. But a
DoH/DoTIPv6
173Views
2
VotesHi I would like to suggest to add the possibility to configure the ipv6 firewall on the Ax58 and Ax53 routers (possibly others) as ipv6 is gaining traction but both devices block any unsolicited ipv6
IPv6
By
tchavei
183Views
5
VotesRespected Moderators, You may refer this thread. https://community.tp-link.com/en/home/forum/topic/643650 Here TPLink User @Sunshine have confirmed that TPLink Home routers do not support IPv6 DDNS on
IPv6
1121Views
0
VotesYour product information say support IPv6 but No any UI to config and mange key section, i.e.,IPv6 Firewall Rules. if it does not have IPv6 Firewall Rules feature, It will be useless with IPv6. becous
IPv6IPv6 Firewall Rules
By
DTW_Business
· Latest post 2024-05-23 07:34:23
by DTW_Business
658Views