Feature Request (Extenders)
2
VotesHello TP-Link Team, I would like to request WPA3 support for the TP-Link RE650 v2. This extender has capable hardware and is still widely used, yet it currently lacks WPA3 security in both Range Exten
WPA3
By
Ikramuddin20
· Latest post Tuesday
by Ikramuddin20
654Views
32
VotesFuture ConsiderationDaisy chain OneMesh WiFi extender
Hello all, I have a OneMesh router with two OneMesh extenders set up in my home. The problem is that one of the extenders is too far from the main router and I need to daisy chain it with an extender
OneMesh
20489Views
168
VotesHey everyone! We got some feedback from our community users requesting for Range Extender to support OneMesh/EasyMesh when works as an Access Point. Currently, OneMesh/EasyMesh is not supported when t
72205Views
1
VotesHello TP-Link Team, I would like to kindly request that you add EasyMesh Ethernet backhaul support to the RE605X V2 in a future firmware update. The recently released firmware for the RE605X V3 (RE605
EasyMeshEasyMesh Ethernet Backhaul
By
waseemadiga
· Latest post 2025-11-14 05:40:49
by waseemadiga
286Views
5
VotesPleas add ethernet bachhaul to re 605x Thank you
3501Views
0
VotesI recently added a TL-WPA8631P Extender to my TL-PA9033P powerline network. I used WPS to configure the WiFi settings to match my Plusnet Hub Two router. This allowed devices on 2.4GHz to connect to e
Device Name
290Views
15
VotesSo I just bought an RE300 dual band mesh extender to replace my old N300. Unfortunately despite checking my C7 router supported one mesh it turned out I needed v5 hardware & mine was v4 :( No problem,
EasyMeshOnemesh
10299Views
1
VotesIt would be very nice if RE550 supported EasyMesh Network via Ethernet Backhaul. Is it only a firmware implementation? Or this hardware is not capable?
EasyMesh Ethernet BackhaulEasyMesh
By
jvicient
· Latest post 2025-10-13 05:12:22
by Andrsouzaaa
788Views
0
VotesGood afternoon, Currently using Archer AX53 connected with easymesh to TL-WPA7617, but its currently using this mode via wireless as shown on the internal page. Current website info says full support
EasyMesh Ethernet Backhaul
By
Fagulhas
· Latest post 2025-10-04 01:19:33
by jhostinbecerra1
390Views
1
VotesHello, I purchased the RE600X a few years ago and have been very satisfied with it. I am currently using two units in my setup—not as extenders, but as access points, since my apartment is fully wired
VLAN
By
ceekay2k
1045Views
6
VotesCurrently, we only have options for scheduled power off in hours for RE550, and we can only choose by "hours". Can we have scheduled power off in "minutes"? Example, from 3:00am to 3:01am. Main purpos
By
Kartronics12
· Latest post 2025-09-17 00:36:47
by FerdinandBenes
3289Views
2
VotesI saw the us version of that model just get ethernet backhaul with software update, we want to get it too.
EasyMesh Ethernet BackhaulEasyMeshOnemeshfirmware update
2843Views