Home Network Community > Wi-Fi Routers > Access to Router after set to WLAN AP
< Wi-Fi Routers

Access to Router after set to WLAN AP

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Access to Router after set to WLAN AP

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Access to Router after set to WLAN AP
Access to Router after set to WLAN AP
2017-10-16 18:39:53
Model :

Hardware Version :

Firmware Version :

ISP :

After setting up my AC1350 Archer_C60 as a WLAN AP (using http://www.tp-link.com/us/faq-417.html) I now cannot access the router´s web-based utility anymore.
Neither using http://tplinkwifi.net (keeps bringing up an "Error 404" (message looks like it´s generated by the router itself)) nor it´s new IP (browser error "Server does not answer")
Neither Wireless or wired...
  0      
 
  0      
 
#1
Options
4 Reply
Re:Access to Router after set to WLAN AP
2017-10-17 22:24:11
Is the router's new IP address in the same IP subnet as the rest of your network?
  0  
  0  
#2
Options
Re:Access to Router after set to WLAN AP
2017-10-18 02:16:03
The new router's IP (192.168.1.251) must be set to an address outside modem/router's DHCP-range (192.168.1.1-250) plus the DHCP-funktionality of the router must be desabled,otherwise it won't work as a WLAN AP for the main routers network.But I think this is the problem why I can't access the WLAN-Router anymore.But shouldn't there be an access to the router, for i.e. altering transmitting power etc. without purging it to factory settings?
  0  
  0  
#3
Options
Re:Access to Router after set to WLAN AP
2017-10-18 10:17:33
The new router is not in the same network of of the DHCP range. And DHCP is disabled, if you would like to login, I think you can unplug the LAN cable from the main router, and connect your PC to the new router, set a static IP such as 192.168.1.100 on the PC, then login to the 192.168.1.251 page
  0  
  0  
#4
Options
Re:Access to Router after set to WLAN AP
2017-10-18 22:12:07
doesn't´t work.
  0  
  0  
#5
Options

Information

Helpful: 0

Views: 760

Replies: 4

Related Articles
WLAN-Router als Access-Point. Internetverbindung instabil zum Router
78 0
 How to access configuration on TP-Link router set up as an AP
712 0
M4 Set up question (AP or router mode)
664 0
Set up router access point or range extender
223 0
 TP-Link TD-W9980 V1 how to set up as a WLAN AP?
252 0
TL-WR841N - CONFIGURATION: Access Point vs. WLAN Router
2724 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.