Home Network Community >
Wi-Fi Routers >
[Security Flaws] Severe flaws called "KRACK" are discovered in the WPA2 protocol
[Security Flaws] Severe flaws called "KRACK" are discovered in the WPA2 protocol
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
[Security Flaws] Severe flaws called "KRACK" are discovered in the WPA2 protocol
Posts: 334
Helpful: 16
Solutions: 0
Stories: 0
Registered: 2012-03-28
2017-10-17 11:29:42
Posts: 334
Helpful: 16
Solutions: 0
Stories: 0
Registered: 2012-03-28
[Security Flaws] Severe flaws called "KRACK" are discovered in the WPA2 protocol
2017-10-17 11:29:42
Tags:
Dear All,
On October 16th, 2017, an security researcher has disclosed some severe flaws in the WPA2 security protocol.
Description of the vulnerability
The vulnerability that known as "KRACK", short for Key Reinstallation Attack, will target the four-way handshake of the WPA2 protocol. Mathy Vanhoef, who published the flaw, said that the flaw may allow an attacker within the Wi-Fi range to decrypt network traffic from a WPA2-enabled device, hijack connections, and inject content into the traffic stream.
The publisher also points out that, the main attack is against the 4-way handshake, and does not exploit access points, but instead targets clients. So it might be that your router does not require security updates.
For more details, please refer to the below article published by Vanhoef:
https://www.krackattacks.com/
The following Common Vulnerabilities and Exposures (CVE) identifiers were assigned to track which products are affected by specific instantiations of the key reinstallation attack:CVE-2017-13077, CVE-2017-13078, CVE-2017-13079, CVE-2017-13080, CVE-2017-13081, CVE-2017-13082, CVE-2017-13084, CVE-2017-13086, CVE-2017-13087, CVE-2017-13088
TP-Link is aware of the vulnerabilities (KRACKs) in the WPA-2 protocol. We have published a security advisory on the official website and are working to solve the problems now.
Security Advisory: http://www.tp-link.com/en/faq-1970.html
[FONT=&]Software updates for the affected devices will be post at http://www.tp-link.com/support.html over the next few weeks.[/FONT]
Your network security is highly regarded by TP-Link.
Clarification for the WPA2 Vulnerabilities:
1. Please have a look at the article published by Mathy Vanhoef and pay attention to the QA listed at the end:
Q: What if there are no security updates for my router?
A: Our main attack is against the 4-way handshake, and does not exploit access points, but instead targets clients. So it might be that your router does not require security updates. We strongly advise you to contact your vendor for more details. In general though, you can try to mitigate attacks against routers and access points by disabling client functionality (which is for example used in repeater modes) and disabling 802.11r (fast roaming). For ordinary home users, your priority should be updating clients such as laptops and smartphones.
From the QA, we can get clear that the vulnerabilities only targets the devices act as Wi-Fi clients, including laptops, smartphones, range extenders working in RE mode, routers/gateways working in RE/WDS/WISP mode.
Thus if you're using the following TP-Link products:
(Unaffected Devices)
# All powerline adapters
# All mobile Wi-Fi products
# Routers and gateways working on default Router mode or Access Point mode
# Range extenders working in AP mode
You will not be affected by the WPA2 vulnerabilities. What you need to do is updating your Wi-Fi clients.
2. Conditions under which devices are vulnerable:
# Physical proximity: An attack can only happen when an attacker is in physical proximity to and within wireless range of your network.
# Time window: An attack can only happen when a client is connecting or reconnecting to a Wi-Fi network.
Devices affected by the vulnerability
Routers working in Repeater Mode/WISP Mode/Client Mode:
TL-WR940N with firmware version 3.17.1 Build 170717 Rel.55495n or earlier (Hardware Version 3.0 or earlier not affected)
[FONT=verdana]TL-WR841Nv13 with firmware version 0.9.1 4.16 v0348.0 Build 170814 Rel.59214n or earlier (Hardware Version 12.0 or earlier not affected)
TL-WR840N with firmware version 0.9.1 4.16 v019a.0 Build 170524 Rel.56478n or earlier (Hardware Version 2.0 or earlier not affected)
TL-WR941HP with firmware version 3.16.9 Build 20170116 Rel.50912n or earlier
TL-WR841HP with firmware version 3.16.9 Build 160612 Rel.67073n or earlier
TL-WR902AC with firmware version 3.16.9 Build 20160905 Rel.61455n or earlier
TL-WR802N with firmware version 0.9.1 3.16 v0188.0 Build 170705 Rel.34179n or earlier
TL-WR810N with firmware version 3.16.9 Build 160801 Rel.57365n or earlier
Routers with WDS function enabled (disabled by default) may be affected. Refer to the [COLOR=#0000ff]FAQ to learn how to check if WDS is enabled on your router.
Range Extenders working in Repeater Mode during a WPA2 handshake that is initiated only when connecting or reconnecting to a router:
TL-WA850RE with firmware version 1.0.0 Build 20170609 Rel.34153 or earlier
TL-WA855RE with firmware version 1.0.0 Build 20170609 Rel.36187 or earlier
TL-WA860RE with firmware version 1.0.0 Build 20170609 Rel.38491 or earlier
RE200 with firmware version 1.1.3 Build 20170818 Rel.58183 or earlier
RE210 with firmware version 3.14.2 Build 160623 Rel.43391n or earlier
RE305 with firmware version 1.0.0 Build 20170614 Rel.42952 or earlier
RE450 with firmware version 1.0.2 Build 20170626 Rel.60833 or earlier
RE500 with firmware version 1.0.1 Build20170210 Rel.59671 or earlier
RE650 with firmware version 1.0.2 Build 20170524 Rel.58598 or earlier
Wireless Adapters:
Archer T6E
Archer T9E
Whole Home Wi-Fi System:
Deco M5 with firmware version 1.1.5 Build 20170820 Rel.62483 or earlier
CPE/WBS/CAP:
CAP300 with firmware version 1.1.0 Build 20170601 Rel.60253 or earlier
CAP300-Outdoor with firmware version 1.1.0 Build 20170601 Rel.60212 or earlier
CAP1750 with firmware version 1.1.0 Build 20170601 Rel.60196 or earlier
CAP1200 with firmware version 1.0.0 Build 20170801 Rel.61314 or earlier
TL-ER604W with firmware version 1.2.0 Build 20160825 Rel.45880 or earlier
CPE520 with firmware version 2.1.6 Build 20170908 Rel.45234 or earlier
CPE610 with firmware version 2.1.5 Build 20170830 Rel. 58245 or earlier
CPE510 with firmware version 2.1.6 Build 20170908 Rel. 45233 or earlier
CPE220 with firmware version 2.1.6 Build 20170908 Rel. 45233 or earlier
CPE210 with firmware version 2.1.6 Build 20170908 Rel. 45234 or earlier
WBS210 with firmware version 2.1.0 Build 20170609 Rel. 57434 or earlier
WBS510 with firmware version 2.1.6 Build 20170908 Rel. 45234 or earlier
Smart home devices:
Smart Plugs and Switch: HS100,HS105,HS110,HS200
Smart Repeater with Plugs: RE350K,RE270K,RE370K
Cameras: NC250,NC260,NC450, KC120
[/FONT]
How to protect your devices
Until a software update is available to eliminate the vulnerability for your product, it is recommended to take the following precautions:
For wireless routers: Make sure your routers are in Router Mode or AP Mode, and patch the operating system of your smartphones, tablets and computers.
For wireless adapters: Patch the operating system of your computers.
Microsoft security update: Microsoft has fixed such security issues as mentioned in https://portal.msrc.microsoft.com/en-US/security-guidance/advisory/CVE-2017-13080
TP-Link has been working on affected models and will release firmware over the next few weeks on our official website.
Reversion History
2017-10-17: Initial release
2017-10-18: Updated some clarifications for the WPA2 vulnerabilities
2017-10-18: Updated the list of affected devices
On October 16th, 2017, an security researcher has disclosed some severe flaws in the WPA2 security protocol.
Description of the vulnerability
The vulnerability that known as "KRACK", short for Key Reinstallation Attack, will target the four-way handshake of the WPA2 protocol. Mathy Vanhoef, who published the flaw, said that the flaw may allow an attacker within the Wi-Fi range to decrypt network traffic from a WPA2-enabled device, hijack connections, and inject content into the traffic stream.
The publisher also points out that, the main attack is against the 4-way handshake, and does not exploit access points, but instead targets clients. So it might be that your router does not require security updates.
For more details, please refer to the below article published by Vanhoef:
https://www.krackattacks.com/
The following Common Vulnerabilities and Exposures (CVE) identifiers were assigned to track which products are affected by specific instantiations of the key reinstallation attack:CVE-2017-13077, CVE-2017-13078, CVE-2017-13079, CVE-2017-13080, CVE-2017-13081, CVE-2017-13082, CVE-2017-13084, CVE-2017-13086, CVE-2017-13087, CVE-2017-13088
TP-Link is aware of the vulnerabilities (KRACKs) in the WPA-2 protocol. We have published a security advisory on the official website and are working to solve the problems now.
Security Advisory: http://www.tp-link.com/en/faq-1970.html
[FONT=&]Software updates for the affected devices will be post at http://www.tp-link.com/support.html over the next few weeks.[/FONT]
Your network security is highly regarded by TP-Link.
Clarification for the WPA2 Vulnerabilities:
1. Please have a look at the article published by Mathy Vanhoef and pay attention to the QA listed at the end:
Q: What if there are no security updates for my router?
A: Our main attack is against the 4-way handshake, and does not exploit access points, but instead targets clients. So it might be that your router does not require security updates. We strongly advise you to contact your vendor for more details. In general though, you can try to mitigate attacks against routers and access points by disabling client functionality (which is for example used in repeater modes) and disabling 802.11r (fast roaming). For ordinary home users, your priority should be updating clients such as laptops and smartphones.
From the QA, we can get clear that the vulnerabilities only targets the devices act as Wi-Fi clients, including laptops, smartphones, range extenders working in RE mode, routers/gateways working in RE/WDS/WISP mode.
Thus if you're using the following TP-Link products:
(Unaffected Devices)
# All powerline adapters
# All mobile Wi-Fi products
# Routers and gateways working on default Router mode or Access Point mode
# Range extenders working in AP mode
You will not be affected by the WPA2 vulnerabilities. What you need to do is updating your Wi-Fi clients.
2. Conditions under which devices are vulnerable:
# Physical proximity: An attack can only happen when an attacker is in physical proximity to and within wireless range of your network.
# Time window: An attack can only happen when a client is connecting or reconnecting to a Wi-Fi network.
Devices affected by the vulnerability
Routers working in Repeater Mode/WISP Mode/Client Mode:
TL-WR940N with firmware version 3.17.1 Build 170717 Rel.55495n or earlier (Hardware Version 3.0 or earlier not affected)
[FONT=verdana]TL-WR841Nv13 with firmware version 0.9.1 4.16 v0348.0 Build 170814 Rel.59214n or earlier (Hardware Version 12.0 or earlier not affected)
TL-WR840N with firmware version 0.9.1 4.16 v019a.0 Build 170524 Rel.56478n or earlier (Hardware Version 2.0 or earlier not affected)
TL-WR941HP with firmware version 3.16.9 Build 20170116 Rel.50912n or earlier
TL-WR841HP with firmware version 3.16.9 Build 160612 Rel.67073n or earlier
TL-WR902AC with firmware version 3.16.9 Build 20160905 Rel.61455n or earlier
TL-WR802N with firmware version 0.9.1 3.16 v0188.0 Build 170705 Rel.34179n or earlier
TL-WR810N with firmware version 3.16.9 Build 160801 Rel.57365n or earlier
Routers with WDS function enabled (disabled by default) may be affected. Refer to the [COLOR=#0000ff]FAQ to learn how to check if WDS is enabled on your router.
Range Extenders working in Repeater Mode during a WPA2 handshake that is initiated only when connecting or reconnecting to a router:
TL-WA850RE with firmware version 1.0.0 Build 20170609 Rel.34153 or earlier
TL-WA855RE with firmware version 1.0.0 Build 20170609 Rel.36187 or earlier
TL-WA860RE with firmware version 1.0.0 Build 20170609 Rel.38491 or earlier
RE200 with firmware version 1.1.3 Build 20170818 Rel.58183 or earlier
RE210 with firmware version 3.14.2 Build 160623 Rel.43391n or earlier
RE305 with firmware version 1.0.0 Build 20170614 Rel.42952 or earlier
RE450 with firmware version 1.0.2 Build 20170626 Rel.60833 or earlier
RE500 with firmware version 1.0.1 Build20170210 Rel.59671 or earlier
RE650 with firmware version 1.0.2 Build 20170524 Rel.58598 or earlier
Wireless Adapters:
Archer T6E
Archer T9E
Whole Home Wi-Fi System:
Deco M5 with firmware version 1.1.5 Build 20170820 Rel.62483 or earlier
CPE/WBS/CAP:
CAP300 with firmware version 1.1.0 Build 20170601 Rel.60253 or earlier
CAP300-Outdoor with firmware version 1.1.0 Build 20170601 Rel.60212 or earlier
CAP1750 with firmware version 1.1.0 Build 20170601 Rel.60196 or earlier
CAP1200 with firmware version 1.0.0 Build 20170801 Rel.61314 or earlier
TL-ER604W with firmware version 1.2.0 Build 20160825 Rel.45880 or earlier
CPE520 with firmware version 2.1.6 Build 20170908 Rel.45234 or earlier
CPE610 with firmware version 2.1.5 Build 20170830 Rel. 58245 or earlier
CPE510 with firmware version 2.1.6 Build 20170908 Rel. 45233 or earlier
CPE220 with firmware version 2.1.6 Build 20170908 Rel. 45233 or earlier
CPE210 with firmware version 2.1.6 Build 20170908 Rel. 45234 or earlier
WBS210 with firmware version 2.1.0 Build 20170609 Rel. 57434 or earlier
WBS510 with firmware version 2.1.6 Build 20170908 Rel. 45234 or earlier
Smart home devices:
Smart Plugs and Switch: HS100,HS105,HS110,HS200
Smart Repeater with Plugs: RE350K,RE270K,RE370K
Cameras: NC250,NC260,NC450, KC120
[/FONT]
How to protect your devices
Until a software update is available to eliminate the vulnerability for your product, it is recommended to take the following precautions:
For wireless routers: Make sure your routers are in Router Mode or AP Mode, and patch the operating system of your smartphones, tablets and computers.
For wireless adapters: Patch the operating system of your computers.
Microsoft security update: Microsoft has fixed such security issues as mentioned in https://portal.msrc.microsoft.com/en-US/security-guidance/advisory/CVE-2017-13080
TP-Link has been working on affected models and will release firmware over the next few weeks on our official website.
Reversion History
2017-10-17: Initial release
2017-10-18: Updated some clarifications for the WPA2 vulnerabilities
2017-10-18: Updated the list of affected devices
#1
Options
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Thread Manage
Announcement Manage
149 Reply
Posts: 6
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2017-10-17
Re:[Security Flaws] Severe flaws called "KRACK" are discovered in the WPA2 protocol
2017-10-20 22:52:01
flairmedic wrote
I'm sure this has been stated on the forum already but I hope people will read and understand this explanation of the current situation:
The Krack Attack method is not really a hardware / software issue completely. The hardware / software will be patched to fix the real issue. WPA / WPA2 encryption uses a key for the devices to communicate anytime and sometimes randomly, when the devices communicate there is what is called a "handshake" between the devices. 4 messages are sent between the devices. At some point in these messages (usually the 3rd message) the devices "agree" on a key that allows them to know they are talking to each other to "secure" the connection the key travels with each transmission between the devices. Currently the key is not randomized enough or regularly enough to prevent the hacker from determining your key. Once they have the key they can tell the devices to not change the key, then do what they want with the info they can see, and even "insert" their own info into your devices (on both the access point i.e. wifi router, and client i.e. smartphone, computer,...etc). Both the access point and the client will need a patch. If the access point only was fixed the hacker can still use access the client. That is why both need the fix. Additionally, Android / Linux devices are susceptible to a "All zero's key hack" where the hacker can change the encryption key to all 0's and not have to use the software to figure out the key each time. That is why just fixing the access point will not completely protect you.
You can watch this if I did not make it clear enough: https://youtu.be/VI89hpI5pos
Hope this helps.
That's the best simple explanation of the KRACK vulnerability I've seen so far. Thanks, flairmedic.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#92
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 1
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2017-10-21
Re:[Security Flaws] Severe flaws called "KRACK" are discovered in the WPA2 protocol
2017-10-21 02:20:24
FlairMedic, would you mind providing a source to this. I was under the same understanding but I'm having trouble finding the appropriate information to back it up to others and this paragraph covers it perfectly, except that I thought I read somewhere that having the AP patched can protect the client.
flairmedic wrote
I'm sure this has been stated on the forum already but I hope people will read and understand this explanation of the current situation:
The Krack Attack method is not really a hardware / software issue completely. The hardware / software will be patched to fix the real issue. WPA / WPA2 encryption uses a key for the devices to communicate anytime and sometimes randomly, when the devices communicate there is what is called a "handshake" between the devices. 4 messages are sent between the devices. At some point in these messages (usually the 3rd message) the devices "agree" on a key that allows them to know they are talking to each other to "secure" the connection the key travels with each transmission between the devices. Currently the key is not randomized enough or regularly enough to prevent the hacker from determining your key. Once they have the key they can tell the devices to not change the key, then do what they want with the info they can see, and even "insert" their own info into your devices (on both the access point i.e. wifi router, and client i.e. smartphone, computer,...etc). Both the access point and the client will need a patch. If the access point only was fixed the hacker can still use access the client. That is why both need the fix. Additionally, Android / Linux devices are susceptible to a "All zero's key hack" where the hacker can change the encryption key to all 0's and not have to use the software to figure out the key each time. That is why just fixing the access point will not completely protect you.
You can watch this if I did not make it clear enough: https://youtu.be/VI89hpI5pos
Hope this helps.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#93
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 1
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2017-10-21
Re:[Security Flaws] Severe flaws called "KRACK" are discovered in the WPA2 protocol
2017-10-21 05:29:29
DaveTheNerd wrote
In it, they explain that the code they use in their routers (a) doesn't use 802.11r and (b) also doesn't accept retried Replay Counter values in the handshake, thereby blocking this type of attack.
This also means – and they explicitly state this – that TP-Link's code has never fully-adhered to the WPA-2 spec. Today that makes them look like prescient wizards, though they are not claiming that at all. ;)
Technically, not entirely true. The WPA-2 spec doesn't have any indicator of what should be done in the case of a replayed packet as part of the 4-part handshake. The spec itself is rather silent on how that should be handled. Some systems (Linux's wpa-suplicant, for example) accepts the packet, and either reapplies the key, or clears the key (bug), depending on the version of the software. So TP-Link isn't "out of spec", they just chose to do something different in a place where the spec was undefined.
Android devices which are not vanilla(Pixels or Nexuses) will have to wait a very long time for a patch.
That may not be true as well. Apparently in the vanilla systems (and most Android platforms), the WPA handler is actually part of the Google Play package. Google has a slated release with this patch on November 9th, which should update nearly all devices that have auto-update turned on (which it is on most devices by default). If you turned it off, I strongly suggest you look for a Google Play package update on the 9th or 10th and manually update it when you see it.
Thanks again TPLink for the quick updates, and for verifying that most of your products were never vulnerable to this to start with (or were only in specific modes). I'll strongly consider that factor when buying hardware in the future.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#94
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 17
Helpful: 7
Solutions: 0
Stories: 0
Registered: 2017-03-25
I disagree, AP are affected as well
2017-10-21 06:33:59
tplink wrote
Just as what I said, TP-Link will patch the routers as well in weeks. And routers are only affected in WDS bridging mode.
The vulnerability mainly targets the Wi-Fi clients, thus if you don't get the router (in default router mode or AP mode) patched through the router, you won't be attacked. If you get the router patched, but Wi-Fi clients not patched, you are likely to be attacked.
Isn't it the part of the AP to distribute the keys in a typical AP-STA setup? The Krack attack works by suppression of the initiation of that key handshake. The attacker then reuses the key within the following resend. Hence, an unpatched AP will surely play it's role in this vector. hostapd and wpa_supplicant, which many of your products use, have both been patched, already. There will be a reason, that not only wpa_supplicant has been patched. Furthermore: what does the chipset manufacturer have to do with compiling hostapd and wpa_supplicant against the SDK and to republish that firmware?
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#95
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 2
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2017-10-21
Re:[Security Flaws] Severe flaws called "KRACK" are discovered in the WPA2 protocol
2017-10-21 13:23:16
Wondering if the Archer C7 series in a wired bridge mode would be susceptible. I have not seen anything on wired bridge mode. I would suspect if the router and the bridge are essentially standard router mode it may be OK. Still need to fix all my clients! I must have a 20 little Wifi devices sprinkled throughout the place.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#96
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 17
Helpful: 7
Solutions: 0
Stories: 0
Registered: 2017-03-25
Re:[Security Flaws] Severe flaws called "KRACK" are discovered in the WPA2 protocol
2017-10-21 17:12:56
[FONT=verdana]TL-WA850RE v1.23 - what's the status here? The leading post seems to refer to rev5 or later...[/FONT]
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#97
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 17
Helpful: 7
Solutions: 0
Stories: 0
Registered: 2017-03-25
Re:[Security Flaws] Severe flaws called "KRACK" are discovered in the WPA2 protocol
2017-10-22 03:38:50
Sitedrifter wrote
Do you realize how obscure LineageOS is in regards to the 100s of millions of Android users? I would bet < .01 percent of the Android users do anything but use the OEM OS. My point being LineageOS is not a good comparison to make TP-Link look like they are sitting on their asses.
Well, the same would apply to LEDE, DD-WRT and others. You are just arguing against closed source and proprietary solutions. LEDE exists for many TP-Link labelled devices, but installing that firmware isn't advisable for the majority of consumers. As is self-compiling the published GPL-licensed code ...
Regarding TP-Link's firmware management: All they'd have to do, was compiling the firmwares against the original SDK with a more recent version of wpa_supplicant and hostapd. Updating the driver shouldn't really be necessary in most cases.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#98
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 2
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2017-10-19
Re:[Security Flaws] Severe flaws called "KRACK" are discovered in the WPA2 protocol
2017-10-22 07:43:28
So without sending through a long technical document; think of it this way. What happens if you go somewhere that the AP isn't patched and you haven't patched your client device. Then you would be vulnerable to an attack. Also if the client is not patched and to the best of my understanding is that the client could be attacked and information pulled just from it's side. Just remember it is a protocol issue if the protocol is vulnerable it is vulnerable on either side that is not patched. You cannot have two different protocols securing the information. I would watch the video for a more visual description.Artifiring wrote
FlairMedic, would you mind providing a source to this. I was under the same understanding but I'm having trouble finding the appropriate information to back it up to others and this paragraph covers it perfectly, except that I thought I read somewhere that having the AP patched can protect the client.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#99
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 1
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2017-10-22
Re:[Security Flaws] Severe flaws called "KRACK" are discovered in the WPA2 protocol
2017-10-22 14:17:28
The page needs to be updated with all router models, including EOL.
My WR340G v3 is EOL and not included in the list but that probably due to EOL and still vulnerable.
Is it time to now dump EOL devices? (Already checked and it does not support dd-wrt which has been patched :(
My WR340G v3 is EOL and not included in the list but that probably due to EOL and still vulnerable.
Is it time to now dump EOL devices? (Already checked and it does not support dd-wrt which has been patched :(
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#100
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 1
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2017-10-23
Re:[Security Flaws] Severe flaws called "KRACK" are discovered in the WPA2 protocol
2017-10-23 07:21:40
Sounds contradictory. The TL-WR802N, a mobile WiFi product, is vulnerable.tplink wrote
(...)
(Unaffected Devices)
(...)
# All mobile Wi-Fi products
(...)
Devices affected by the vulnerability
Routers working in Repeater Mode/WISP Mode/Client Mode:
(...)
[COLOR=#333333][FONT=AktivGrotesk-Regular][FONT=verdana]TL-WR802N with firmware version 0.9.1 3.16 v0188.0 Build 170705 Rel.34179n or earlier[/FONT]
(...)[/FONT]
If that is the case, then how is the TL-WR702N - basically the same but with N150 WiFi - not vulnerable? It supports client mode and is frequently used as such (in Poland as an accessory for Cyfrowy Polsat STBs). 3rd party firmware is unavailable due to low flash size.
Then we have the TL-MR3020 - also a mobile WiFi product - which supports WISP mode. Not vulnerable either? 3rd party firmware is available, but it's still your product, still sold and still popular.
Not using client/WISP functionality is not a long term remedy. WISP mode is part of the reason I chose to buy a TL-MR3020. Client mode is the purpose for which I bought 3 (three) TL-WR702Ns.
KRACK testing tools will be released soon to reveal devices still vulnerable. We should expect the tools to be reverse-engineered for malicious purposes not long after. The situation will get ugly then.
TL;DR: Are you certain the TL-MR3020 and TL-WR702N are not vulnerable?
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#101
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 334
Helpful: 16
Solutions: 0
Stories: 0
Registered: 2012-03-28
2017-10-17 11:29:42
Posts: 334
Helpful: 16
Solutions: 0
Stories: 0
Registered: 2012-03-28
Information
Helpful: 0
Views: 25761
Replies: 154
Voters 0
No one has voted for it yet.
Tags
Related Articles
Archer D(
509
0
'Krack' patches?
418
0
Severe packet loss
46
0
Deco red “D”
269
0
Security
943
0
Report Inappropriate Content
Transfer Module
New message