Range extender RE200 connected to another RE200 with ethernet cable?
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Range extender RE200 connected to another RE200 with ethernet cable?
Model : RE200
Hardware Version :
Firmware Version :
ISP :
Hello!
I'll try to describe the situation first:
The house has 3 floors
1- has the RE200
2- has the modem and router
3- has another RE200 and also Ethernet cable going directly to floor 1 where the RE200 is located
*it's not possible to move the router and modem to the 3'rd floor
The range extender on the 3'rd floor connects very good to the router on the 2'nd floor
The ranger extender on the 1'st floor can't get a good connection at all
Is it possible to connect the RE200 on the3'rd floor to the ethernet cable and then connect it to the RE200 on the 1'st floor?
Will it help somehow? Will it help to connect it first to a switch, then the switch to the cable going down to 1'st floor?
If not, is there any other product that can be used like that (Get wireless signal on the 3'rd floor, extend the range, and also 'extend' it by cable to another ranger extender)?
Hope I was clear,
Thank you!
Hardware Version :
Firmware Version :
ISP :
Hello!
I'll try to describe the situation first:
The house has 3 floors
1- has the RE200
2- has the modem and router
3- has another RE200 and also Ethernet cable going directly to floor 1 where the RE200 is located
*it's not possible to move the router and modem to the 3'rd floor
The range extender on the 3'rd floor connects very good to the router on the 2'nd floor
The ranger extender on the 1'st floor can't get a good connection at all
Is it possible to connect the RE200 on the3'rd floor to the ethernet cable and then connect it to the RE200 on the 1'st floor?
Will it help somehow? Will it help to connect it first to a switch, then the switch to the cable going down to 1'st floor?
If not, is there any other product that can be used like that (Get wireless signal on the 3'rd floor, extend the range, and also 'extend' it by cable to another ranger extender)?
Hope I was clear,
Thank you!
