How to make Deco M5 work with Teredo
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
How to make Deco M5 work with Teredo
Model :
Hardware Version :
Firmware Version :
ISP :
[HR][/HR] Hi. I play Forza Horizon 3 on PC and when I try to join online content I receive "UNABLE TO JOIN SESSION. FAILED TO RESOLVE SERVER ADDRESS. CHECK YOUR DNS SETTINGS".
So in the Xbox app I go to "Settings - Network" and NAT-type is set to Open but Serverconnection is set to Blocked.
I have tried all the MS suggested solutions and none of it worked. Win 10 Xbox games online are using the hidden network adapter called "Teredo Tunneling Psuedo-Interface" and you can check the status of this adapter using the following command in CMD: "netsh interface Teredo show state".
So when I connect the PC directly to the network wall socket playing online works fine and I get the folloing Teredo status:
Teredo Parameters Connected directly to the wall socket
---------------------------------------------
Type : client
Server Name : win1710.ipv6.microsoft.com.
Client Refresh Interval : 20 seconds
Client Port : unspecified
State : qualified
Client Type : teredo client
Network : unmanaged
NAT : none (global connectivity)
NAT Special Behaviour : UPNP: No, PortPreserving: No
Local Mapping : 85.24.xxx.xxx:xxxxx
External NAT Mapping : 85.24.xxx.xxx:xxxxx
But when I am connected to Deco M5 using Wifi or Wired I get the folloing Teredo status and then it doesn't work to play online:
Teredo Parameters using Deco M5
---------------------------------------------
Type : client
Server Name : win1710.ipv6.microsoft.com.
Client Refresh Interval : 20 seconds
Client Port : unspecified
State : qualified
Client Type : teredo client
Network : unmanaged
NAT : cone
NAT Special Behaviour : UPNP: Yes, PortPreserving: Yes
Local Mapping : 192.168.0.101:xxxxx
External NAT Mapping : 85.24.xxx.xxx:xxxxx
Any suggestions on how to solve this?
Hardware Version :
Firmware Version :
ISP :
[HR][/HR] Hi. I play Forza Horizon 3 on PC and when I try to join online content I receive "UNABLE TO JOIN SESSION. FAILED TO RESOLVE SERVER ADDRESS. CHECK YOUR DNS SETTINGS".
So in the Xbox app I go to "Settings - Network" and NAT-type is set to Open but Serverconnection is set to Blocked.
I have tried all the MS suggested solutions and none of it worked. Win 10 Xbox games online are using the hidden network adapter called "Teredo Tunneling Psuedo-Interface" and you can check the status of this adapter using the following command in CMD: "netsh interface Teredo show state".
So when I connect the PC directly to the network wall socket playing online works fine and I get the folloing Teredo status:
Teredo Parameters Connected directly to the wall socket
---------------------------------------------
Type : client
Server Name : win1710.ipv6.microsoft.com.
Client Refresh Interval : 20 seconds
Client Port : unspecified
State : qualified
Client Type : teredo client
Network : unmanaged
NAT : none (global connectivity)
NAT Special Behaviour : UPNP: No, PortPreserving: No
Local Mapping : 85.24.xxx.xxx:xxxxx
External NAT Mapping : 85.24.xxx.xxx:xxxxx
But when I am connected to Deco M5 using Wifi or Wired I get the folloing Teredo status and then it doesn't work to play online:
Teredo Parameters using Deco M5
---------------------------------------------
Type : client
Server Name : win1710.ipv6.microsoft.com.
Client Refresh Interval : 20 seconds
Client Port : unspecified
State : qualified
Client Type : teredo client
Network : unmanaged
NAT : cone
NAT Special Behaviour : UPNP: Yes, PortPreserving: Yes
Local Mapping : 192.168.0.101:xxxxx
External NAT Mapping : 85.24.xxx.xxx:xxxxx
Any suggestions on how to solve this?