can't get a TL-WR810N to connect to a TP-LINK_8927.
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
can't get a TL-WR810N to connect to a TP-LINK_8927.
Model :
Hardware Version :
Firmware Version :
ISP :
Hi All,
probably a really dumb question here, but please bear with me.
We live in a remote area. Wired BB speeds are 0.2mbps, but we have good 4G so we chose to use the TP-LINK_8927 ( which gives us 70mbps)..
Now, after a burglary, we have put in CCTV which can be remotely viewed on our phones and stream over the net.
The TP_LINK8927 doesn't have an ethernet port, so we have brought a TL-WR810N, which we use as a Ethernet to wifi 'repeater' in Client mode.
I can't access the login screen onhttp://tplinkwifi.net.
Being not very tech savvy, I have Checked for DHCP client access and it is enabled.
How can I Make them talk to each other?. What am I missing??
Hardware Version :
Firmware Version :
ISP :
Hi All,
probably a really dumb question here, but please bear with me.
We live in a remote area. Wired BB speeds are 0.2mbps, but we have good 4G so we chose to use the TP-LINK_8927 ( which gives us 70mbps)..
Now, after a burglary, we have put in CCTV which can be remotely viewed on our phones and stream over the net.
The TP_LINK8927 doesn't have an ethernet port, so we have brought a TL-WR810N, which we use as a Ethernet to wifi 'repeater' in Client mode.
I can't access the login screen onhttp://tplinkwifi.net.
Being not very tech savvy, I have Checked for DHCP client access and it is enabled.
How can I Make them talk to each other?. What am I missing??