TPLink Archer C7 1750 - UPnP cannot open port to WAN

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

TPLink Archer C7 1750 - UPnP cannot open port to WAN

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TPLink Archer C7 1750 - UPnP cannot open port to WAN
TPLink Archer C7 1750 - UPnP cannot open port to WAN
2018-02-09 15:26:03
Model :

Hardware Version :

Firmware Version :

ISP :

Hello,

Here is the information about Archer C7 1750

Firmware Version: 1.0.5 Build 20171101 rel.37754(5553)
Hardware Version: Archer C7 v4.0

The problem is that the router only open port on Virtual Servers setting. But, the port that configured in UPnP cannot be opened.
I used nmap to check the open port from external IP.

Here is the system log, The UPnp is started but port can only be opened by using Virtual Servers.
2018-02-09 13:21:55 nat[9895]: <5> 211054 Virtual server created succeeded[ex-port:9001 ip:10.10.0.101 in-port:9001 protocol:all]
2018-02-09 13:21:55 nat[9895]: <5> 211054 Virtual server created succeeded[ex-port:5000 ip:10.10.0.10 in-port:5000 protocol:all]
2018-02-09 13:21:54 nat[9895]: <5> 211054 Virtual server created succeeded[ex-port:5001 ip:10.10.0.10 in-port:5001 protocol:all]
2018-02-09 13:21:53 nat[9895]: <5> 211054 Virtual server created succeeded[ex-port:1194 ip:10.10.0.10 in-port:1194 protocol:udp]
2018-02-09 13:21:50 nat[9895]: <6> 211501 Initialization succeeded
2018-02-09 13:21:50 nat[9895]: <6> 211501 Initialization succeeded
2018-02-09 13:21:22 upnp[9324]: <6> 217504 Service start
2018-02-09 13:21:21 upnp[9324]: <6> 217505 Service stop

Johnny
  0      
  0      
#1
Options
2 Reply
Re:TPLink Archer C7 1750 - UPnP cannot open port to WAN
2018-02-19 12:49:27
I was going to post this now.
Same router. Same problem.
  0  
  0  
#2
Options
Re:TPLink Archer C7 1750 - UPnP cannot open port to WAN
2018-03-16 16:39:42
If UPnP works, you don't need port forwarding. It's auto.
Disable UPnP if you want to open ports for device with UPnP enabled connected to the router
  0  
  0  
#3
Options