c2600 v1 : Disable NAT : HowTo ?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

c2600 v1 : Disable NAT : HowTo ?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
c2600 v1 : Disable NAT : HowTo ?
c2600 v1 : Disable NAT : HowTo ?
2018-07-24 14:26:51
Model :

Hardware Version :

Firmware Version :

ISP :

Hi Guys
I did search the forum on howto disable NAT on TP-Link Archer c2600 and found no results.
Pls forgive me if my searching was wrong.

Here is my topology

Laptop ===wifi=192.168.0.0/24==>c2600==via Wired Cable ==192.168.1.0/24=>Verizon_FTTH_Router===> Internet

Right now, I am having an issue with Double NAT,
The c2600 is NATting the WiFi traffic towards Verizon, And then Verizon NATs the traffic towards Internet.

I want to disable NAT on the c2600 Archer and do pure AP and Router.
I didn't find any options to disable NAT on c2600.

Pls advice.
Many thanks in advance
  0      
  0      
#1
Options
2 Reply
Re:c2600 v1 : Disable NAT : HowTo ?
2018-07-25 16:57:05
If you want the c2600 work as a pure AP, disable DHCP server on it.
  0  
  0  
#2
Options
Re:c2600 v1 : Disable NAT : HowTo ?
2018-07-27 16:41:54
HI @Bowen98
Many thanks for your prompt reply.
Its greatly appreciated.

How will c2600 be able to "route" the LAN segment (now on static) to WAN ( dhcp via Verizon AP, but can do static assignment too)
Basically right now the c2600 LAN (via Wireless) is 192.168.0.x/24 and that has to be "routed" to 192.168.1.10 (my c2600 IP assigned by Verizon AP)
So all the 192.168.0.x/24 clients need to be able to reach 192.168.1.10
I will ensure, return route from Verizon router back in to TP-LINK exists for 192.168.0.x/24 pointing to 192.168.1.10
  0  
  0  
#3
Options