New firmware 1.2.3 20180819 Rel. 68100

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

New firmware 1.2.3 20180819 Rel. 68100

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
New firmware 1.2.3 20180819 Rel. 68100
New firmware 1.2.3 20180819 Rel. 68100
2018-08-28 12:04:40
Model :

Hardware Version :

Firmware Version :

ISP :

Let's see if this is ok;)
  0      
  0      
#1
Options
37 Reply
Re:New firmware 1.2.3 20180819 Rel. 68100
2018-08-29 15:46:28
Seems to work ok here!
  0  
  0  
#2
Options
Re:New firmware 1.2.3 20180819 Rel. 68100
2018-08-29 17:03:23
Updated yesterday and I've experienced no issues so far.
  0  
  0  
#3
Options
Re:New firmware 1.2.3 20180819 Rel. 68100
2018-08-29 18:19:37
Updated my two deco devices and no issues.
  0  
  0  
#4
Options
Re:New firmware 1.2.3 20180819 Rel. 68100
2018-08-29 19:11:11
Good to see no issues so far but I might hold off a bit longer. My last upgrade went a bit awry.
  0  
  0  
#5
Options
Re:New firmware 1.2.3 20180819 Rel. 68100
2018-08-29 19:42:18
Where should I set DNS now? In ipv4 or DHCP settings, or both?
  0  
  0  
#6
Options
Re:New firmware 1.2.3 20180819 Rel. 68100
2018-08-29 21:28:50
Trend AV is blocking UDP Port Scan from the router 192.168.4.1 on several devices since update..
  0  
  0  
#7
Options
Re:New firmware 1.2.3 20180819 Rel. 68100
2018-08-29 23:59:36
Still no ability to manually change the WiFi channel.......
  0  
  0  
#8
Options
Re:New firmware 1.2.3 20180819 Rel. 68100
2018-08-30 01:05:50
The update failed for my Deco and now the whole thing not working. Don't know what to do!!!
  0  
  0  
#9
Options
Re:New firmware 1.2.3 20180819 Rel. 68100
2018-08-30 11:56:21
Upgrade reset my LAN IP to 172.16.0.1. Previously was away 192.168.0.1. A minor annoyance to reset and reboot (twice) to get it back to normal. That, and needing to power cycle a few devices that didn't appreciate it. Luckily. My reserved ip addresses followed the network switch so I didn't have to rebuild those again.
  0  
  0  
#10
Options
Re:New firmware 1.2.3 20180819 Rel. 68100
2018-08-30 15:53:29
Still problem with display of app speed of the connected devices on the guest network which do not show in the devices list. (No problem If connected on the main network)
  0  
  0  
#11
Options