Wifi Coverage issue in Archer C50

Wifi Coverage issue in Archer C50
Wifi Coverage issue in Archer C50
2018-09-01 05:53:41
Model :

Hardware Version :

Firmware Version :

ISP :

Hi,


Earlier I was using AC900 Wireless Dual Band Router: Archer C20 ( https://www.tp-link.com/la/products/details/cat-9_Archer-C20.html#overview).


I returned Archer C20 and started using TP-Link AC1200 Wireless Dual Band Router: Archer C50 ( https://www.tp-link.com/in/products/details/cat-9_Archer-C50.html).


In terms of specification, Archer C50 is better than Archer C20 but practically I didn’t find better performance in Archer C50.


Earlier I placed in on a table. Later on I hung it on the wall but no changes observed in the Wifi Coverage.


What can I do for better Wifi coverage of Archer C50?


Regards
Einfo
0
0
#1
Options
2 Replies
Re:Wifi Coverage issue in Archer C50
2018-09-05 03:01:05
Location is important and varies based on your house layout, walls, electrical equipment, other devices that transmit all have an effect. The 2.4 GHz will generally reach father than the 5 GHZ which tends to be faster. Try moving it around to different places and angled differently. Check your router settings for which channel each SSID is on. I have mine on auto, but some have found selecting a specific channel helps them because of other interference. Have you set up IPv6 and checked it with https://test-ipv6.com/? Sometimes other slower devices can slow down WIFI such as an old printer that may be using 'G'. And the issue could be in the device you are using such as a laptop with a slow WIFI card.
0
0
#2
Options
Re:Wifi Coverage issue in Archer C50
2018-09-11 21:04:31
I think you need technical support to get your wifi working, I suggest you that if you're still facing the same problem then you can contact by visiting my profile. It will be pleased to help you thanks.
0
0
#4
Options