Openvpn via Archer c1200: cannot see LAN network

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Openvpn via Archer c1200: cannot see LAN network

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Openvpn via Archer c1200: cannot see LAN network
Openvpn via Archer c1200: cannot see LAN network
2018-10-01 13:29:03
Model :

Hardware Version :

Firmware Version :

ISP :

Most likely a noob issue, but please bare with me.

I've set up a connection to my c1200 via OpenVPN. The router assigns my remote VPN client computer an address of 10.8.0.x, however, my LAN network lives in 192.168.0.x. As a result, I cannot RDP to a LAN computer living at a static address of 192.168.0.141. RDP is turned on (allowed) and the Windows firewall is set to allow RDP traffic to the host at 192.168.0.141, but I cannot see it from my current 10.8.0.x client location.

Any help would be appreciated!
  0      
  0      
#1
Options
1 Reply
same problem
2018-10-22 11:05:51
Hi there,

I'm having the same problem and apparently it is due to using the Access OpenVPN server (on the Archer router) in a tunneling configuration instead of bridging.
I've requested TP Link to help on the issue and especially to advise how we can manually change the OpenVPN Access server's lower level configuration.

Will post here about any updates.

Cheers
Raph
  0  
  0  
#2
Options