Internet in LAN to LAN two routers setup drops after some minutes
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Internet in LAN to LAN two routers setup drops after some minutes
Model :
Hardware Version :
Firmware Version :
ISP :
Hi. I have an Archer C2600 as main router, connected to a modem with optic fiber. Its IP is 192.168.1.1. It ip range is 192.168.1.1 to .254.
And I have a second WDR-3500 in another room, both connected by a ethernet cable, from LAN port to LAN port.
The DHCP in the second router (which has a fixed ip 192.168.1.20) is disabled.
The problem is that internet works perfectly, but only for two or three minutes after turning on the second router. In the first router everything works perfectly.
If you reboot the second router, again, internet works for two or three minutes. Both firmwares are updated. I don´t know what to do. Can you please help me?
Thanks.
Hardware Version :
Firmware Version :
ISP :
Hi. I have an Archer C2600 as main router, connected to a modem with optic fiber. Its IP is 192.168.1.1. It ip range is 192.168.1.1 to .254.
And I have a second WDR-3500 in another room, both connected by a ethernet cable, from LAN port to LAN port.
The DHCP in the second router (which has a fixed ip 192.168.1.20) is disabled.
The problem is that internet works perfectly, but only for two or three minutes after turning on the second router. In the first router everything works perfectly.
If you reboot the second router, again, internet works for two or three minutes. Both firmwares are updated. I don´t know what to do. Can you please help me?
Thanks.