Yes it is on SSID,  not on Interface, if you found a other solutions ,  tell me pls...

I just check to device modify, but i can not set priority, and will lost....

cue

PS: make me happy and delete your pictures out.. thx.

@vootshi    take it from messag #11  ,, it works for 5.6 Kali

You need wired online, for the ./install.sh   

@aokneufi 

It works, thanks a lot!

Take it from

https://github.com/EntropicEffect/rtl8822bu

Read the README.ma  an follow the steps from #DKMS

it work...

you need wired online , also for laptop, with eth cable, for install the first normal kernel and gcc stuff ......

But first update your system,  reboot ok

normally you need the compiling stuff, witch i made in my versions installing...(history)

But !! Now i don't do that, you have to install the arround stuff by hand.... ok!

ok for the Entropic stuff, you need install module-assistant and dkms and git

Install First:

module-assistant

dkms

git

after installing  execute as root

m-a prepare           # the module-assistant check your system, and install all nessesary

then install the Driver :

(myby you go to a driver directory, if you have and like?,  like /opt/Driver?,  build it with mkdir -p /opt/Driver ,  and cd /opt/Driver, then execute this....)

git clone https://github.com/EntropicEffect/rtl8822bu     # get it

cd rlt8822bu

sudo dkms add .      (saw you the point after add ?   the point .  )

sudo dkms install -m 88x2bu -v 1.1

there is also a README.MA in the rtl8822bu  directory...  

i don't make automatic install script anymore, because,  the dkms.conf it works now,  this is fresh....   and stuff around i install in my scripts, and correct the dkms.conf,  but for now, his dkms.conf works now..   so the few steps everybody can do by hand...  ,    so i don't build any driver on me....thx to Entropic  :)

troubleshooting;:

Allways asking for the wlan passphrase?

 /etc/default/grub

GRUB_CMDLINE_LINUX="net.ifnames=0"

update-grub

reboot

@aokneufi 

Hi, I followed all the steps. I can get the NIC to scan the nearby SSIDs, but I can't put it in monitor mode.

[code]

sudo iw --debug wlan0 set monitor control

-- Debug: Sent Message:
--------------------------   BEGIN NETLINK MESSAGE ---------------------------
  [NETLINK HEADER] 16 octets
    .nlmsg_len = 44
    .type = 29 <0x1d>
    .flags = 5 <REQUEST,ACK>
    .seq = 1619047673
    .port = 452986045
  [GENERIC NETLINK HEADER] 4 octets
    .cmd = 6
    .version = 0
    .unused = 0
  [PAYLOAD] 24 octets
    08 00 03 00 03 00 00 00 08 00 05 00 06 00 00 00 ................
    08 00 17 00 04 00 03 00                         ........
---------------------------  END NETLINK MESSAGE   ---------------------------
-- Debug: Received Message:
--------------------------   BEGIN NETLINK MESSAGE ---------------------------
  [NETLINK HEADER] 16 octets
    .nlmsg_len = 64
    .type = 2 <ERROR>
    .flags = 0 <>
    .seq = 1619047673
    .port = 452986045
  [ERRORMSG] 20 octets
    .error = -95 "Operation not supported"
  [ORIGINAL MESSAGE] 16 octets
    .nlmsg_len = 16
    .type = 29 <0x1d>
    .flags = 5 <REQUEST,ACK>
    .seq = 1619047673
    .port = 452986045
---------------------------  END NETLINK MESSAGE   ---------------------------
command failed: Operation not supported (-95)

[/code]

Any idea why?

[code]

└─$ uname -a                                                                                                    161 ⨯
Linux kali 5.10.0-kali7-amd64 #1 SMP Debian 5.10.28-1kali1 (2021-04-12) x86_64 GNU/Linux

└─$ lsusb                                                                                                       161 ⨯
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 002: ID 2357:0115 TP-Link Archer T4U ver.3
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

[/code]

Thanks in advance,

Janico

Hi community,

I have recently purchased the TP-LINK Archer T4U AC1300 WiFi Adapter to be used for Kali Linux in Virtual Machine . My current Kali Linux Kernel version is 5.10. Is there any way for me to install the WiFi adapter on my Kali VM? Thank you.