Archet c2
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
I finally found the solution,
we just had to put the right gateway
ROUTER1
IP: 192.168.20.32 <=> gateway: 192.168.10.252
ROUTER2
IP: 192.168.15.0 <=> gateway: 192.168.10.253
- Copy Link
- Report Inappropriate Content
Hello all,
I am new to this forum
I have 2 routers Achet c2 connector on an internet box
here is the schema of my configuration
the router1 to the box is ok
the router2 to the bok it's ok
the router1 to the router2 it is not good
ADVANCED ROUTING
Router1 configuration:
Destination IP: 192.168.20.32
Subnet Mask: 255.255.255.224
Gateway: 192.168.10.253
Interface: empty
Router2 configuration:
IP Destination: 192.168.15.0
Subnet Mask: 255.255.255.224
Gateway: 192.168.10.252
Interface: empty
DIAGNOSTIC TOOLS (router1)
result ping 192.168.20.35 (network 3)
Request time out
I do not know what's wrong
thank you
- Copy Link
- Report Inappropriate Content
I finally found the solution,
we just had to put the right gateway
ROUTER1
IP: 192.168.20.32 <=> gateway: 192.168.10.252
ROUTER2
IP: 192.168.15.0 <=> gateway: 192.168.10.253
- Copy Link
- Report Inappropriate Content
well done, the gateway is just like the next hop, we had to appoint the other router so that message can be sent to it
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 586
Replies: 3
Voters 0
No one has voted for it yet.