Hello,

Once the Deco M9+ is setup in Access Point, it looks like that the implementation is not complete: Broadcast is not fully functional (conflict with Homekit device registration, CPL management from Devolo).

Also, I noticed that the built-in speedtest provides significant difference (920 Mbit/s in Routeur Mode 600 Mbit/s in AP Mode)

I was expecting that the AP mode should allow to see all devices, including broadcast. Ping is ok (nothing is blocked). Coud it be the routing table not fully updated/implemented?

Here a simplified network:

• Fiber Modem with ip 192.168.0.1
  • Main Routeur (Synology RT2600AC) with ip 192.168.1.1 and DHCP
    • Primary CPL (no ip)
      • Secondary CPL with ip 192.168.1.10
        • Computer A with ip 192.168.1.100
        • Computer B with ip 192.168.1.101
    • Deco M9+ Primary (AP Mode)
      • Computer C with ip 192.168.1.102
      • Deco M9+ Secondary
        • Computer D with ip 192.168.1.103
    • Apple TV with 192.168.1.104
    • Computer E with ip 192.168.1.105

Ping is ok from all devices. Register a device (homekit based with wifi from Deco) is not allowed/working.

Computer C or D cannot broadcast CPLs. Computer A or B or E can see CPLs