Why We Need Smart Connect on Tri-Band Routers?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Why We Need Smart Connect on Tri-Band Routers?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Why We Need Smart Connect on Tri-Band Routers?
Why We Need Smart Connect on Tri-Band Routers?
2019-01-25 03:30:22 - last edited 2019-12-06 01:50:37

Why We Need Smart Connect on Tri-Band Routers?

Tri-band routers are becoming increasingly popular now. However, many people do not know their routers well and may miss some powerful features. Let us check and see if you have ever encountered any of these situations.

  • When you go upstairs from the living room to the bedroom, you have to reconnect to the SSID changing from 5 GHz to 2.4 GHz

  • When many devices, such as tablets, phones, and laptops, access the wireless network at home, your online gaming experience instantly deteriorates.

In order to improve your online experience, you may spend a lot of time guessing which frequency band or which location provides the best the wireless signal. However, the results are not always as satisfactory as you would expect.

Now, just relax and try the Smart Connect function on your TP-Link tri-band router and it will take care of all of the guesswork for you.

How Does Smart Connect Work?

One SSID, Seamless Steering

Wireless signals cannot stay stable all the time. Obstacles and distance can cause signal attenuation. This is especially true for the 5 GHz band.

Therefore, sometimes it is necessary to change the frequency in order to get a better signal. Traditional routers often need to set the SSID separately for different frequency bands. Smart Connect can set only one SSID for all three wireless bands. When you connect a device to your router, Smart Connect will automatically identify the best available channel and assign the device to it.

 

Multiple Clients, Smooth Internet

If many devices are connected to the same SSID, won’t the network be too crowded? The answer is no. With Smart Connect, one SSID supports three Wi-Fi bands, which ensures the entire wireless network has sufficient frequency resource to allocate. The job of Smart Connect is to make the distribution more reasonable.

Smart Connect relies on an advanced algorithm that not only automatically determines which band is best for each device, but also constantly monitors the overall status of frequency resource. If a client is not busy, the Smart Connect reassigns it to ensure other clients can occupy more bandwidth on that band.

When Should I Enable Smart Connect?

It is best to enable Smart Connect when you have devices released at different times. Some of them may only support 2.4 GHz while others support both 2.4 GHz and 5 GHz. Smart Connect can greatly assist routers to ensure Wi-Fi bands are used efficiently.

How to Configure Smart Connect on TP-Link Wi-Fi router?

  1. Verify the hardware connection and make sure your router is connected to the Internet.
  2. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router.
  3. Go to Advanced> Wireless> Wireless Settings, and enable Smart Connect

*Here takes Archer C4000 as an example. The actual interface may vary slightly from the product model. For more details, please refer to the User Guide of your router.

  0      
  0      
#1
Options
2 Reply
Re:Why We Need Smart Connect on Tri-Band Routers?
2019-01-25 21:33:00

But this is not true!!!

 

The worse you could do is to let the router to decide for you.

And the best you can do is you to decide over the router...

I've tested this so many times and smart-connection sometimes or very often choose itself a very bad channel over 5ghz or 2.4ghz that it really slow down the Internet... (facts).

 

Instead: for example let always 2.4Ghz on channel 6 and 5Ghz on channel 44 and you will get best speed and best coverage...

 

The smart-connection will not always choose best for you, and in my opinion: router's with Smart-Connection has failed to deliver best wifi speed!!!

  1  
  1  
#2
Options
Re:Re:Why We Need Smart Connect on Tri-Band Routers?
2019-03-14 10:00:01

Hi

 

I agree with you. The smart connect is not smart enough. I think the policy should give a advice to the wireless client but not kick it off directly if the client is connected to the router.

Hope tplink can provide a true smart connect for us.

  0  
  0  
#4
Options

Information

Helpful: 0

Views: 5184

Replies: 2