Home Network Community >
Wi-Fi Routers >
[Beta firmware] Solved TL-WR1043ND hang up with high-bandwith and WEB interface dies
[Beta firmware] Solved TL-WR1043ND hang up with high-bandwith and WEB interface dies
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
[Beta firmware] Solved TL-WR1043ND hang up with high-bandwith and WEB interface dies
Posts: 334
Helpful: 16
Solutions: 0
Stories: 0
Registered: 2012-03-28
2012-12-12 10:32:46
Posts: 334
Helpful: 16
Solutions: 0
Stories: 0
Registered: 2012-03-28
[Beta firmware] Solved TL-WR1043ND hang up with high-bandwith and WEB interface dies
2012-12-12 10:32:46
Tags:
[Announcement]
The new firmware used for TL-WR1043ND V1 only, it is strictly prohibited to upgrade if not this model , any incorrect upgrade will damage your device.
If the firmware version of your TL-WR1043ND is earlier than "110429", please use "110429" version firmware to upgrade it firstly, then upgrade the router with this beta firmware.
[Firmware Version]
3.13.12 Build 121210 Rel.73912n (Beta)
[Release Note]
1. Fixed a bug that router would hang up with high-bandwidth.
2. Fixed a bug the WEB management page sometimes would be no response.
[Background]
With some Taiwan\Russia\Hongkong high-bandwidth ISP, the TL-WR1043ND sometimes will hang up and no response.
[Current State]
The new beta firmware worked normally in our high-bandwidth LAB, now we are waiting for the further test results from our customers.
[Beta firmware download link]
http://www.tplink.com/resources/temp/wr1043nv1_en_3_13_12_up_boot(121210)_UN_beta.rar
The new firmware used for TL-WR1043ND V1 only, it is strictly prohibited to upgrade if not this model , any incorrect upgrade will damage your device.
If the firmware version of your TL-WR1043ND is earlier than "110429", please use "110429" version firmware to upgrade it firstly, then upgrade the router with this beta firmware.
[Firmware Version]
3.13.12 Build 121210 Rel.73912n (Beta)
[Release Note]
1. Fixed a bug that router would hang up with high-bandwidth.
2. Fixed a bug the WEB management page sometimes would be no response.
[Background]
With some Taiwan\Russia\Hongkong high-bandwidth ISP, the TL-WR1043ND sometimes will hang up and no response.
[Current State]
The new beta firmware worked normally in our high-bandwidth LAB, now we are waiting for the further test results from our customers.
[Beta firmware download link]
http://www.tplink.com/resources/temp/wr1043nv1_en_3_13_12_up_boot(121210)_UN_beta.rar
#1
Options
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Thread Manage
Announcement Manage
134 Reply
Posts: 127
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2012-11-15
Re:[Beta firmware] Solved TL-WR1043ND hang up with high-bandwith and WEB interface dies
2012-12-13 04:23:05
Hi:
First 24 hours
Operation: normal
Firmware installed from wr1043nv1_en_3_13_11_up (120,905) BETA
Region : Argentina
Model : TL-WR1043ND
Hardware Version : v1.8
Wireless: on
Firmware Version : 3.13.12 Build 121210 Rel.73912n (Beta)
ISP : fibertel (Dynamic IP)
First 24 hours
Operation: normal
Firmware installed from wr1043nv1_en_3_13_11_up (120,905) BETA
Region : Argentina
Model : TL-WR1043ND
Hardware Version : v1.8
Wireless: on
Firmware Version : 3.13.12 Build 121210 Rel.73912n (Beta)
ISP : fibertel (Dynamic IP)
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#2
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 127
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2012-11-15
Re:[Beta firmware] Solved TL-WR1043ND hang up with high-bandwith and WEB interface dies
2012-12-13 20:01:27
Hi:
First 40 hours...
Operation: normal
Firmware installed from wr1043nv1_en_3_13_11_up (120,905) BETA
Region : Argentina
Model : TL-WR1043ND
Hardware Version : v1.8
Wireless: on
Firmware Version : 3.13.12 Build 121210 Rel.73912n (Beta)
ISP : fibertel (Dynamic IP)
First 40 hours...
Operation: normal
Firmware installed from wr1043nv1_en_3_13_11_up (120,905) BETA
Region : Argentina
Model : TL-WR1043ND
Hardware Version : v1.8
Wireless: on
Firmware Version : 3.13.12 Build 121210 Rel.73912n (Beta)
ISP : fibertel (Dynamic IP)
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#3
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 127
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2012-11-15
Re:[Beta firmware] Solved TL-WR1043ND hang up with high-bandwith and WEB interface dies
2012-12-14 02:42:54
Hi:
First 46 hours...
Operation: failure
Firmware installed from wr1043nv1_en_3_13_11_up (120,905) BETA
Region : Argentina
Model : TL-WR1043ND
Hardware Version : v1.8
Wireless: on
UPnp: activated
Load: 6 client LAN - 1 Gbps, 1 clients WiFi
Current firmware Version : 3.13.12 Build 121210 Rel.73912n (Beta)
ISP : fibertel (Dynamic IP) 6 Mb/s
WEB interface : correct
Internet : failure I Can not surf internet
LED SYS: correct
I Change the wr1043nd and put WR941ND and i surf internet
For me, so far the best option is:
1) install firmware wr1043nv1_en_3_13_4_ up_boot (120,926) Singapour
2) Install firmware wr1043nv1_en_3_13_11_up (120,905) _beta
First 46 hours...
Operation: failure
Firmware installed from wr1043nv1_en_3_13_11_up (120,905) BETA
Region : Argentina
Model : TL-WR1043ND
Hardware Version : v1.8
Wireless: on
UPnp: activated
Load: 6 client LAN - 1 Gbps, 1 clients WiFi
Current firmware Version : 3.13.12 Build 121210 Rel.73912n (Beta)
ISP : fibertel (Dynamic IP) 6 Mb/s
WEB interface : correct
Internet : failure I Can not surf internet
LED SYS: correct
I Change the wr1043nd and put WR941ND and i surf internet
For me, so far the best option is:
1) install firmware wr1043nv1_en_3_13_4_ up_boot (120,926) Singapour
2) Install firmware wr1043nv1_en_3_13_11_up (120,905) _beta
File:
dddd-Frame116aaa.jpgDownload
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#4
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 15
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2012-11-17
Re:[Beta firmware] Solved TL-WR1043ND hang up with high-bandwith and WEB interface dies
2012-12-14 03:05:27
I flashed a new beta firmware dated 121210 and after 2 days of up time my router hung. I can not get the web interface and also there is no an internet access. But my computer connected by utp cable to the LAN port of the router is getting IP address from DHCP of the router without any problem. My router does not reply on ping requests. WiFi сan sometimes get connected successfully, or maybe not, it freezes on stage of obtaining IP address. I would suggest that problem in DNS module (DNS proxy, DNS forwarder) of a router. I will try not to use DNS proxy of the router. I'm going to enter IP address of provider's DNS directly to DHCP server of the router, so that my devices can get DNS of my provider.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#5
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 11
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2012-11-30
Re:[Beta firmware] Solved TL-WR1043ND hang up with high-bandwith and WEB interface dies
2012-12-15 05:15:36
Upgraded firmware to the new beta:3.13.12 Build 121210 Rel.73912n (Beta).
Router stopped working after 5 hours. After power cycle the router worked for 46 hours and then crashed again.
Device: TL-WR1043ND
HW version: 1.8
Load: 4 wired, 1 wireless
WAN: Dynamic via cable modem.
Router stopped working after 5 hours. After power cycle the router worked for 46 hours and then crashed again.
Device: TL-WR1043ND
HW version: 1.8
Load: 4 wired, 1 wireless
WAN: Dynamic via cable modem.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#6
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 15
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2012-11-17
Re:[Beta firmware] Solved TL-WR1043ND hang up with high-bandwith and WEB interface dies
2012-12-15 22:16:26
It was the second attempt with this firmware, but my router has stopped working after 40 hours of up time.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#7
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 127
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2012-11-15
Re:[Beta firmware] Solved TL-WR1043ND hang up with high-bandwith and WEB interface dies
2012-12-17 00:31:26
TP-LINK Administrators:
Please, compare the differences between the firmware wr1043nv1_en_3_13_11_up (120,905)
and the firmware _beta wr1043nv1_en_3_13_12_up_boot (121,210) _beta
The first, works correctly for me, so far never hung, and the last work an average of 40-46 hours until it crashes.
Regarding the DNS Xcel says,
I did the following test:
At the time when the router crashes, I manually put DNS, specifically those of google, but still no surf internet.
Obviously there are some software bug that causes hang in different ways:
Sometimes the SYS LED is permanently on, and not surf internet
and it is impossible to enter the web interface.
At other times,only, I can not surf internet.
Observe, that all who have written so far,we have the same versión 1.8
Have you tried this firmware with version 1.8?
Region : Argentina
Model : TL-WR1043ND
Hardware Version : v1.8
Wireless: on
UPnp: Enabled
Load: 6 client LAN - 1 Gbps, 1 clients WiFi
Current firmware Version : 3.13.12 Build 121210 Rel.73912n (Beta)
ISP : fibertel (Dynamic IP) 6 Mb/s
See my previous message:
For me, so far the best option is:
1) install firmware wr1043nv1_en_3_13_4_up_boot (120,926) Singapour
2) Install firmware wr1043nv1_en_3_13_11_up (120,905) _beta
wr1043nv1_en_3_13_11_up (120,905) wireless on:
wr1043nv1_en_3_13_11_up (120,905) wireless off:
Please, compare the differences between the firmware wr1043nv1_en_3_13_11_up (120,905)
and the firmware _beta wr1043nv1_en_3_13_12_up_boot (121,210) _beta
The first, works correctly for me, so far never hung, and the last work an average of 40-46 hours until it crashes.
Regarding the DNS Xcel says,
I did the following test:
At the time when the router crashes, I manually put DNS, specifically those of google, but still no surf internet.
Obviously there are some software bug that causes hang in different ways:
Sometimes the SYS LED is permanently on, and not surf internet
and it is impossible to enter the web interface.
At other times,only, I can not surf internet.
Observe, that all who have written so far,we have the same versión 1.8
Have you tried this firmware with version 1.8?
Region : Argentina
Model : TL-WR1043ND
Hardware Version : v1.8
Wireless: on
UPnp: Enabled
Load: 6 client LAN - 1 Gbps, 1 clients WiFi
Current firmware Version : 3.13.12 Build 121210 Rel.73912n (Beta)
ISP : fibertel (Dynamic IP) 6 Mb/s
See my previous message:
For me, so far the best option is:
1) install firmware wr1043nv1_en_3_13_4_up_boot (120,926) Singapour
2) Install firmware wr1043nv1_en_3_13_11_up (120,905) _beta
wr1043nv1_en_3_13_11_up (120,905) wireless on:
wr1043nv1_en_3_13_11_up (120,905) wireless off:
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#8
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 15
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2012-11-17
Re:[Beta firmware] Solved TL-WR1043ND hang up with high-bandwith and WEB interface dies
2012-12-17 02:07:01
Very, very unstable firmware. Stopped working after 18 hours.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#9
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 3
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2012-10-16
Re:[Beta firmware] Solved TL-WR1043ND hang up with high-bandwith and WEB interface dies
2012-12-17 16:00:42
It seems the bug is everywhere.
jorgecorazondeleon, what is your ISP bandwidth?
Do you have any special application to trigger the hung problem?
jorgecorazondeleon, what is your ISP bandwidth?
Do you have any special application to trigger the hung problem?
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#10
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 127
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2012-11-15
Re:[Beta firmware] Solved TL-WR1043ND hang up with high-bandwith and WEB interface dies
2012-12-17 19:37:44
http://www.cablevisionfibertel.com.ar/seccion-922-fibertel-6-megas.html
Ingress Bandwidth:: 6Mbps
Egress Bandwidth:768Kbps
The problem occurs at any time,it seem random
Sometimes just surfing internet ...
May be a script?
I remember having surfing in page with java when the fault occurred.
Applications are normal:emule-uTorrent
Region : Argentina
Model : TL-WR1043ND
Hardware Version : v1.8
Wireless: on
Firewall:Enabled
UPnp: Enabled
Load: 6 client LAN - 1 Gbps, 1 clients WiFi
Current firmware Version : 3.13.12 Build 121210 Rel.73912n (Beta)
ISP : fibertel (Dynamic IP) 6 Mb/s
Ingress Bandwidth:: 6Mbps
Egress Bandwidth:768Kbps
The problem occurs at any time,it seem random
Sometimes just surfing internet ...
May be a script?
I remember having surfing in page with java when the fault occurred.
Applications are normal:emule-uTorrent
Region : Argentina
Model : TL-WR1043ND
Hardware Version : v1.8
Wireless: on
Firewall:Enabled
UPnp: Enabled
Load: 6 client LAN - 1 Gbps, 1 clients WiFi
Current firmware Version : 3.13.12 Build 121210 Rel.73912n (Beta)
ISP : fibertel (Dynamic IP) 6 Mb/s
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#11
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 334
Helpful: 16
Solutions: 0
Stories: 0
Registered: 2012-03-28
2012-12-12 10:32:46
Posts: 334
Helpful: 16
Solutions: 0
Stories: 0
Registered: 2012-03-28
Information
Helpful: 0
Views: 15180
Replies: 134
Voters 0
No one has voted for it yet.
Tags
Report Inappropriate Content
Transfer Module
New message