[Beta firmware] Solved TL-WR1043ND hang up with high-bandwith and WEB interface dies

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

[Beta firmware] Solved TL-WR1043ND hang up with high-bandwith and WEB interface dies

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
134 Reply
Re:[Beta firmware] Solved TL-WR1043ND hang up with high-bandwith and WEB interface dies
2013-05-15 00:52:56

theholemaker wrote

This is last version,for ipv6 i'm not sure...

There is something I do not understand:
I see two links: the one who sent me and another,
both from factory to openwrt,
Do you know that case is the other?
http://downloads.openwrt.org/attitude_adjustment/12.09/ar71xx/generic/openwrt-ar71xx-generic-tl-wr1043nd-v1-squashfs-factory.bin
http://downloads.openwrt.org/attitude_adjustment/12.09/ar71xx/generic/openwrt-ar71xx-generic-tl-wr1043nd-v1-jffs2-factory.bin

I found something:
Next, decide if you wish the squashfs or jffs2 version. The difference being the squashfs version uses a read-only file system with a read-write overlay (where all the changes get written); and the jffs2 version uses a read-write file system. In the end, you can make modifications to both versions, but you are either making it straight on the file system or on the transparent overlay. The overlay version (squashfs) is slightly safer as it allows an easy reset to defaults, whereas the jffs2 version is more powerful. For normal users, squashfs is more than enough.
  0  
  0  
#122
Options
Re:[Beta firmware] Solved TL-WR1043ND hang up with high-bandwith and WEB interface dies
2013-05-17 04:32:16
can i upgrade directly from gargoyle 1.4.7 to openwrt? gargoyle is based on it.
  0  
  0  
#123
Options
Re:[Beta firmware] Solved TL-WR1043ND hang up with high-bandwith and WEB interface dies
2013-05-17 04:42:16
You have openwrt, gargoyle is only GUI interface.
  0  
  0  
#124
Options
Re:[Beta firmware] Solved TL-WR1043ND hang up with high-bandwith and WEB interface dies
2013-05-24 03:10:13
I am using TP-Link WR1043ND router and also using the latest Firmware version (TL-WR1043ND_v1_130428). i am using 10 Mbps internet in PPPoE connection. when i try to download something with torrent in a full speed. My router hang up daily 3-4 time. one of my friend also buy this router and he also use this Firmware and also he have same problem with his router.When we want to download in high bandwidth it hang up every time. we are very unhappy with this router behavior.i think this router firmware have some bug in high bandwidth. We hope TP-Link will help us as soon as possible.

Region : Bangladesh
Model : TL-WR1043ND
Hardware Version : v1.0
Wireless: on
UPnp: Enabled
Load: 1 client LAN
Firmware Version: wr1043nv1_en_3_13_13_up_boot(130428)

Please solve this router problem.
Thank You
  0  
  0  
#125
Options
install Gargoyle 1.5.4
2013-05-24 04:15:40
on this router module if you install gargoyle V1.5.4 the unit is very stable, i had no issues anymore after flashing to gargoyle, wifi is much better, no disconnects, everything is working well.
the stock firmware is a piece of shit, i emailed to the support a week ago, no answer, very unserious company they don't care about customers at all.
  0  
  0  
#126
Options
Re:[Beta firmware] Solved TL-WR1043ND hang up with high-bandwith and WEB interface dies
2013-05-24 17:21:32
Upppppppppppp!
  0  
  0  
#127
Options
Re:[Beta firmware] Solved TL-WR1043ND hang up with high-bandwith and WEB interface dies
2013-07-30 04:39:53

manirhossen wrote

I am using TP-Link WR1043ND router and also using the latest Firmware version (TL-WR1043ND_v1_130428). i am using 10 Mbps internet in PPPoE connection. when i try to download something with torrent in a full speed. My router hang up daily 3-4 time. one of my friend also buy this router and he also use this Firmware and also he have same problem with his router.When we want to download in high bandwidth it hang up every time. we are very unhappy with this router behavior.i think this router firmware have some bug in high bandwidth. We hope TP-Link will help us as soon as possible.

Region : Bangladesh
Model : TL-WR1043ND
Hardware Version : v1.0
Wireless: on
UPnp: Enabled
Load: 1 client LAN
Firmware Version: wr1043nv1_en_3_13_13_up_boot(130428)

Please solve this router problem.
Thank You


Exactly the same problem here.

Region: Slovakia

Firmware Version: 3.13.13 Build 130428 Rel.58290n

Hardware Version: WR1043ND v1 00000000

Waiting for fix. Thank you.
  0  
  0  
#128
Options
WR1043ND hangs every few hours
2013-11-10 03:21:43
I purchased this router - TL-WR1043ND a few weeks ago to use with my cable Internet (1 Mbps connection). The main idea was to replace my trust Linksys router which has 100 Mbps ports, and I needed something faster for file transfers over the LAN.

Now, with PPoE, the router was a breeze to setup, and worked fine for the first week or so. After that, I have had to reboot the router every few hours, every day.

The SYS light sometimes goes off and some times stays ON permanently.

When the router hangs, I cannot even connect to the web interface via the wired LAN connection from my PC.

3.13.13 Build 130428 Rel.58290n
WR1043ND v1 00000000


I do not want to go for any third party software, rather I would want TP-Link to fix the issue. This is certainly not a cheap router.
  0  
  0  
#129
Options
Re:[Beta firmware] Solved TL-WR1043ND hang up with high-bandwith and WEB interface dies
2013-11-11 01:49:28

wondro wrote

Exactly the same problem here.

Region: Slovakia

Firmware Version: 3.13.13 Build 130428 Rel.58290n

Hardware Version: WR1043ND v1 00000000

Waiting for fix. Thank you.



I have the same problem too with V1.8. TP-LINK should fix this i reported this error almost 1 year ago and they didn't to anything with it. The sent me a beta firmware, but it was more crappier the final ones. Using OpenWRT is not a solution, beacuse they have problems too.
  0  
  0  
#130
Options
Re:[Beta firmware] Solved TL-WR1043ND hang up with high-bandwith and WEB interface dies
2013-12-09 20:44:17
Update: Hardware issue confirmed by TP-Link support. Got a replacement device (October 2013) manufacturing. Using it since yesterday. It has not hung/ frozen.
  0  
  0  
#131
Options