Latest firmware (version 1.3.1) with new features for Deco M5 is available now

Latest firmware (version 1.3.1) with new features for Deco M5 is available now

58 Reply
Re:Re:Latest firmware (version 1.3.1) with new features for Deco M5 is available now
2019-07-30 01:59:50

Same thing happened to me yesterday.  I reset my modem and the M5s and I finally got it working for a while last night then... It stopped. I just reconfigured and cloned MAC of my wife's  laptop which was directly connected to the modem and worked fine all day. So far so good. Might want to try this option and see if it helps...until we hear from TPLink. Good luck!

  0  
  0  
#61
Options
Re:Latest firmware (version 1.3.1) with new features for Deco M5 is available now
2019-07-30 22:13:36

What about Deco P7 firmware update?

  0  
  0  
#62
Options
Re:Re:Re:Latest firmware (version 1.3.1) with new features for Deco M5 is available now
2019-07-31 05:43:05

I have been having speed issues as well. With the latest firmware on my 3 M5's

 

I live in a very rural location without many options for internet. Highest speeds I can get with my provider is 25mbs (during non peak hours which I'll get about 15mbs) Last firmware I had disconnection issues, this update fixed that however I'm now having speed issues and its making it almost unusable. I'm getting 5-10mbs from my already very limited internets speeds. if I plug directly into modem it's anywhere from 15-25mbs. Wiring into the main deco is also showing the same 5-10mbs. 

 

I'm also having a really strange problem. Almost everyday at the same time my internet goes completely down. It's in between 10pm and 11pm and last for 1 to 2 hours I'll get 999ping and 0 mbs or it won't even allow me to do a speed test at all. A reset of the M5's will bring it back up but extremely slow speeds like 2-3mbs but again if I connect directly to my modem I'll hit 20-25mbs as this is non peak hours. I've done everything. Played with every option. There's no parental setting enabld  to make sense of the down time. Ive switchd out the main deco to another to rule out a hardware issue. Done a full reset of all. Nothing works. It's weird to say that I would have rather dealt with all the issues of the last firmware. Plugging into the main deco is showing the same slower speeds as what I'm getting on wifi 

 

I've had this product since last December. It worked great on whatever firmware was active at the time. Since then I've had nothing but issues with every single update. I'm to a point where I think I'm just done with this and ready to go back to a traditional router.

  0  
  0  
#63
Options
Re:Latest firmware (version 1.3.1) with new features for Deco M5 is available now
2019-10-27 20:53:23

@Brook hello,

Sometime I am experiencing iPad disconnect from wifi deco satellite even if deco app says everything is online and ok.

  0  
  0  
#66
Options
with new features for Deco M5 is available . Latest firmware (version 1.4.0)
2020-01-10 21:09:15

@Rioja  January 10 ,i have detected a new firmware for my decos system. The 1.4.0  Build 20191223 Ref.38921, I have instaled it and everything works perfectly. For now Know the improvements it entail.

  0  
  0  
#69
Options
Re:Latest firmware (version 1.3.1) with new features for Deco M5 is available now
2020-05-02 10:19:31

@Brook  Nice work, but ....

The Philips hue bridge can be connected, it finds 20/20 lamps ( i have more in my house).
When i follow the instructions i need to give a location for each lamp. That works well.

Then going next it tries to save data... FAILED SAVING ...

So Hue bridge connected but no bulbs/lamps are added to the deco.

Tried over and over, removed from hue bridge, reconnected etcetera...

No luck at all. Any suggestions ?

 

 

  0  
  0  
#70
Options
Re:Latest firmware (version 1.3.1) with new features for Deco M5 is available now
2020-05-02 11:16:15

@MSM I suppose we are talking about that you have M5 decos. Thus, surely if you update to the latest firmware version 1.4.4 your problems will be solved. A greeting

  0  
  0  
#71
Options
Re:Latest firmware (version 1.3.1) with new features for Deco M5 is available now
2020-05-02 13:55:34

@Rioja 

  Type Device Name Model Firmware Version Latest Firmware Version
   

office_2

M5(1.0)

1.4.4 Build 20200221 Rel. 65392

-

   

custom_3

M5(1.0)

1.4.4 Build 20200221 Rel. 65392

-

   

custom_4

M5(1.0)

1.4.4 Build 20200221 Rel. 65392

-

   

living_room_5

M5(1.0)

1.4.4 Build 20200221 Rel. 65392

-

   

custom_6

M5(1.0)

1.4.4 Build 20200221 Rel. 65392

-

   

hallway_1

M5(1.0)

1.4.4 Build 20200221 Rel. 65392

-

 

There are no ipdate available, all on latest. Just double checked. % are wired connected, one remote on wifi. Systems work great and stable in all other scenarios. 

The link with Bridge works, is visible in deco M5 and on bridge. Just when saving the location (last step) it creates an error massage not being able to save (or a time-out??)

In my option that should not cause the Pilips-Hue devices (20+) not being visible, they schould be visible without a room attached. But they are not visible at all due to the error.

Can't find what causes it.

  0  
  0  
#72
Options