TL-WDR3600 cannot connect from lan to wlan clients (ping telnet ssh)
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TL-WDR3600 cannot connect from lan to wlan clients (ping telnet ssh)
Region : Netherlands
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : 3.13.23 Build 120820 Rel.73549n
ISP :
Hello,
I recently purchased an TL-WDR3600. Setup was easy. Both wlan channels work perfectly. All clients can connect to the internet and access my lan connected NAS.
But here is the problem. I have some wlan devices which needs to be connected sometimes by http: port 80 and also by telnet or ssh.
I can connect from a wlan device to a lan device. But NOT from a wlan to wlan or a lan to wlan. I allready diabled WMM and tried some other wlan settings, like disable one channel, changing the channel width etc.
My setup is : ADSL device -->(192.168.1.X dhcp) WAN TL-WDR3600 --> to LAN&WLAN (192.168.0.X dhcp and some LAN connected with static 0.200, 0.210)
I hope the question is clear, it is a bit hard to explain.
Thanks Koen
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : 3.13.23 Build 120820 Rel.73549n
ISP :
Hello,
I recently purchased an TL-WDR3600. Setup was easy. Both wlan channels work perfectly. All clients can connect to the internet and access my lan connected NAS.
But here is the problem. I have some wlan devices which needs to be connected sometimes by http: port 80 and also by telnet or ssh.
I can connect from a wlan device to a lan device. But NOT from a wlan to wlan or a lan to wlan. I allready diabled WMM and tried some other wlan settings, like disable one channel, changing the channel width etc.
My setup is : ADSL device -->(192.168.1.X dhcp) WAN TL-WDR3600 --> to LAN&WLAN (192.168.0.X dhcp and some LAN connected with static 0.200, 0.210)
I hope the question is clear, it is a bit hard to explain.
Thanks Koen
