I have problem with my connection, I connet WiFi by Archer 4E card

Ping to my router:

Pinging 192.168.0.1 with 32 bytes of data:
Reply from 192.168.0.1: bytes=32 time=3ms TTL=64
Reply from 192.168.0.1: bytes=32 time=1936ms TTL=64
Reply from 192.168.0.1: bytes=32 time=6ms TTL=64
Reply from 192.168.0.1: bytes=32 time=17ms TTL=64
Reply from 192.168.0.1: bytes=32 time=15ms TTL=64
Reply from 192.168.0.1: bytes=32 time=3ms TTL=64
Reply from 192.168.0.1: bytes=32 time=3ms TTL=64
Reply from 192.168.0.1: bytes=32 time=1558ms TTL=64
Reply from 192.168.0.1: bytes=32 time=3ms TTL=64
Reply from 192.168.0.1: bytes=32 time=4ms TTL=64
Reply from 192.168.0.1: bytes=32 time=4ms TTL=64
Reply from 192.168.0.1: bytes=32 time=3ms TTL=64
Reply from 192.168.0.1: bytes=32 time=1737ms TTL=64
Reply from 192.168.0.1: bytes=32 time=3ms TTL=64
Reply from 192.168.0.1: bytes=32 time=4ms TTL=64
Reply from 192.168.0.1: bytes=32 time=3ms TTL=64

I checked ping in my two laptops from the same place in my home and ping is ok, so it's not a problem with my router, it's not a problem with distance.

In all device OP is Windows 10.

I shutdown almost all processes and I have still same problem.

I tried many many many things ;).

And after reinstall drivers (from dvd), ping was ok :), but after restart computer ping returned to "normal"

Finally I found workaround, when I set autoconfig disabled (like this: netsh wlan set autoconfig enabled=no interface="Wi-Fi"), ping is ok.

I must allways enable this before shutdown (otherwise it will not connect to netowrk after start).

But this is only workaround, I think that problem my be in drivers?

Any idea?

Regards

Tomasz Boryło