@walbermr 

Hi,

Do you have a link please?

Thank you kindly.

Cheers

Caesar

I seem to have a very similar issue but on my AX11000.

All of a sudden every device on the second 5ghz band (AX-160mhz) disconnects. When I access the router from a different device I can see that indeed 5ghz-2 is empty. None of my AX devices can connect so I have to do a reboot to get everything back in order. Happens every few days.

@BBena 

Definitely an issue concerning the DFS channels, as the second 5 Ghz band of the AX11000 only has DFS channels (from 100 to 128 in my case, Eastern Europe).

I have two AX11000 units, one set up as router and the other as AP, and both have been working flawlessly for the past 40 or so days.

Actually, I have the two 5 Ghz bands set to 160 MHz, with fixed channels, and all of my devices can connect and stay connected without any problem - including two laptops with the antiquated Intel AC 7265 wifi card.

With all due respect, I would suspect operator error in your case, as I find it hard to believe that your single unit is broken, while my two units are not.

@broxtor 

been doing some reading on these dfs channels. Apparently it is expected for the connection to be dropped when switching between or coming off these frequencies. A previous router of mine had the option to avoid these dfs channels when auto channels were selected. 
i

Hi, 

I got a new Archer AX6000 device yesterday. I had problems with Wifi 5Ghz, basically yesterday got disconnected and no of the devices could connect too it.  I would like to install the new driver. My router say is updated with lastest firmware with 10.7 , but I am reading there is a newer one 10.8.

I bought in estonia and TP-link has no location website for Estonia. In website warn the users to not install.

https://www.tp-link.com/us/support/download/archer-ax6000/#Firmware

What should I do?

all the best,

Mar 

@mcanet 

Bring it back. TP-Link doesn't give a sh*t about errors and mistakes on their end...

@Caesar Estonia it have stupid law. I boutgh as company and does not allow returns. 

@mcanet 

I installed this Beta version ax6000v1_us-up-ver1-0-8-P9[20200318-rel14152]_beta_2020-03-18_16.03.53.zip and so far so good.
Let's see for how long...

@Kevin_Z

And what did they fix for the AX11000 ? Nothing ! Only to go round and round in circles and having almost scoured all the engineering department, you lot are still on Beta version. For months now. Does TP Link even care ! Why keep me pissed off all the time  ? Your solutions are stories, no router I have hand in the last 25 years ever behaved like this. You all should be ashamed that this is such a dud as well the AX3000, the 6000 and the AX50. If you can't get it right. RESIGN FROM YOUR JOB ! And do something else !