Deco P9 - WiFi Issues, Intermittent Connection
Hi,
I purchased the Deco P9 yesterday and installed them on my Network, I currently have a Virgin Media 1000mbs package.
I put the Virgin Super Hub into Modem Mode and connected the first P9 up, it connected smoothly, from there I plugged in another ethernet cable and ran it through the ceiling to my troublesome room, I then powered on my next P9 and plugged the ethernet into it.
I then went and connected another P9 via WiFi rather than Ethernet.
I was then able to create a router mode network, all worked fine for roughly an hour, all families member came home and I mimicked the original SSID and Password so devices were auto-connecting.
I then shut down my laptop and left the house for one hour, when I came back, my phone (Samsung S10, which left the network) wouldn't stay connected to the network, it would load 1 page and then would say "Unable to connect to the internet". I booted up my laptop and this was having the same issue, it would connect but would drop internet connectivity.
The internet however was working okay for others in the household, they we're streaming (hard wired via P9) and also using WiFi surfing the internet on their Laptop too.
The only resolution I had was to reset each Deco, put my modem into Router mode and the Deco's into Access Point mode, from here I was able to connect.
However, this morning a family member complained of not being able to access the internet from their bedroom (directly above the hardwired P9), I did a speedtest in there when I was running in Router mode and I was getting 200mbs on consecutive attempts, so later on today I will run check the connectivity in that room.
Has anyone ran into any of the above issues? I'm close to sending my P9's back as I only received them yesterday and they've actually increased the problems in my network rather than solved them!
Any advice would be appreciated, thanks!
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@JR4 I just posted a new post with similar problems using P7 but it sounds pretty much the same sort of problem just that it has been working without problems for some months. Now I am suffering daily internet disconnections
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hi
I have similiar issues with my P9 (x3).
I have tried everything suggested in this thread to fix the issue. Nothing works. I still have issues every day. Randomly my devices are unable to connect to the internet trough P9 WiFi mesh and only thing that fixes the issue temporarily is to reboot or take wifi off and back on from the device several times. Rebooting P9 works too. Internet works ok for most of the devices, even through P9. Its just that randomly some devices are not working while others work.The issue is really similiar to IP conflict but none of the devices indicate any IP issues (I also tested static ip adresses based on mac addresses so I doubt its IP related). It seems to me that the issue happens more often to devices that are near secondary P9's.
I have following devices:
Telewell router, three P9 access points, two pc computers, one laptop, four mobile phones, one tablet, two TV's, robot vacuum cleaner, Philips hue hub, Telldust tellstick, rasberry
To minimize the issue I ended up using P9 as an access point and connecting all important devices directly wired to Telewell router. One pc is wired to main P9 and that works relatively ok. Telewell has WiFi too so I have almost gone full circle back to square one where I only have Telewell. The only reason I bought P9 was to extend WiFi little further to yard, carage and utility area of my house with the power line connection between the P9's. Funny thing is, after all the trouble I don't even know if the powerline data works because the app is too simplified and there is no information about the connection speeds between the P9's (or any usefull logging features that would help to solve this issue).
For a long time I thought it was my setup and I spent so many hours to fix it but after reading this thread I'm convinced that its not my setup, its the product that is the problem. If anyone is having similiar issues and you can still refund, don't think twice. After all its over 4 months from the 1st issue reports and no progress on the solution, no firmware or app updates either.
- Copy Link
- Report Inappropriate Content
[Resolved] - possibly....
Hi All, I think I have resolved my Internet connection issues with the Deco 9 units. I have moved the power plug of my Main unit to a wall socket rather than using a power strip. Since doing this last week I have not had a loss of internet, where previously it was dropping once or twice a day. All 3 units are using power direct from the wall and the mesh is working well. Hope it helps.
- Copy Link
- Report Inappropriate Content
@Kevin_Z : Exact same issue as the others. Started own thread to troubleshoot my specific setup: https://community.tp-link.com/en/home/forum/topic/203200?page=1
You will find in that post my Network Topology and all answers to questions you ask earlier in this thread.
- Copy Link
- Report Inappropriate Content
@Sherv My firmware says it is current and up to date @ 1.0.2 Build 20190917 Re. 71168 But in other posts it shows latest firmware is @ 1.0.4 what is the correct firmware version and why is it stating it is current if it isnt?
- Copy Link
- Report Inappropriate Content
@JR4 I just installed the 3 pack of P9 in router mode a few days ago and directly connected it into wall socket (No Longer in Surge protector) and have 2 more Additional repeaters on the way. I have noticed that it constantly is dropping Wifi and the units appear online (Blue Light) and App shows Online. But i need to go into TV and reset Wifi to reconnect, i really noticed this yesterday (Rainy day on Sunday) when we tried to watch a movie it would discoonnect about every 45 60 min. so frustrating cant even watch a movie.
If I dont get any useful information to resolve this in the next 48 hours i will be returning this unit and the oadditional ones on there way here now.
- Copy Link
- Report Inappropriate Content
My firmware is 1.0.2 Build 20190917 Rel. 71168 too - P9's. It says it is up to date.
A couple of things i have also noticed.
- Fast Roaming will not enable. I click the switch and it just goes straight back to disabled.
- More often than not a hard re-boot of an affected device (e.g. laptop) resolves the problem, or in the case of an iphone turning wifi off and back on again. The same is true for the xbox which in my case is wired to a P9 - a full reboot of the device restores connectivity. i.e. completely disconnecting a device from the network and reconnecting it resolves the connection problem.
- I have no monthly reporting - despite it being switched on. Says it fails to load. Never checked before so no idea if this ever worked.
I'm finally resigned toi the fact i am going to have to re-invest in a traditional powerline setup (that is reliable). I so wish i hadn't sold my devolo setup so quickly. Very frustrating.
- Copy Link
- Report Inappropriate Content
To all those who have commented recently asking if anyone is looking into this issue. As well as posting here I also raised a parallel ticket with the TP-Link support team and they have been assisting with a number of suggestions. We have confirmed all the devices are working properly and we are now trying a beta firmware (so far successfully)- some of the actions I have completed have been very technical but I feel we are making progress and recommend that you do the same.
Cheers
- Copy Link
- Report Inappropriate Content
thanks for your update. Ok I will try this parallel action too. But it is troubling to think a device that should just be plug and go requires hours of personal effort to get working properly. But if I can can contribute to getting a resolution assisting support for the benefit of all so be it. Thanks to you for your approach and persistence to find a resolution.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 8
Views: 37088
Replies: 77