utp cable

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

utp cable

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
utp cable
utp cable
2013-01-07 22:15:01
Region : Argentina

Model : TL-WA901ND

Hardware Version : V2

Firmware Version :

ISP :


Region : Philippines

Model : TL-WA5210G

Hardware Version : Not Clear

Firmware Version :

ISP :


what type of utp cable should i use to connect tl-wa5210g to its PoE injector?
And, if i connected an external antenna will it work simultaneously with its built-in antenna?
  0      
  0      
#1
Options
2 Reply
Re:utp cable
2013-01-08 14:10:35
Just normal ethernet cable...external antenna should work...
  0  
  0  
#2
Options
Re:utp cable
2013-01-11 23:52:54

doc wrote

Region : Argentina

Model : TL-WA901ND

Hardware Version : V2

Firmware Version :

ISP :


Region : Philippines

Model : TL-WA5210G

Hardware Version : Not Clear

Firmware Version :

ISP :


what type of utp cable should i use to connect tl-wa5210g to its PoE injector?
And, if i connected an external antenna will it work simultaneously with its built-in antenna?


For TL-WA5210G, please use a branded UTP cable (good quality cable cat5 or cat5e).
The maximum UTP cable length you can use from the passive POE to the
TL-WA5210G is about 50 meters if your UTP cable is of good quality.


As for the antenna, if you wish to use an external antenna for the TL-WA5210G,
the antenna must be a 2.4Ghz antenna. Finally, the default setting on the TL-WA5210G
uses the built-in directional antenna so you need to change it from internal to external
antenna.

Unfortunately, built-in antenna and external antenna will not work simultaneously :(

Good luck.
  0  
  0  
#3
Options