Archer T3U v1.0 drops 5 Ghz connection after Windows 10 1909 Update
Archer T3U v1.0 drops 5 Ghz connection after Windows 10 1909 Update
The adapter works fine under windows 10 1903 (for a long time) conecting by 5ghz at Archer C5 V4 (780 ~ 866.7 Mbps). After windows update to 1909 version the Archer stay very hot under high load, speed drops to zero and disconnection occur. Windows diagnostic fix the issue telling about a gateway conflict and Archer Realy turn on again. I make tests with 3 diferents drivers and nothing change. I used USB 2.0 port from 8 years old HP notebook Windows 1909) and USB 3.1 from AMD Rysen 5 3600 - Asus X570 Chipset (windows 1909). No make difference. To some intel WiFi chipsets a driver update resolved the problem. So Maybe A TP Link driver update solve the disconection and health problem with Archer T3U v1 .
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@bebaire44 Thanks for your opinion. Tp link never more. Asus are expensive but very good and make the client more happy than tp link.
- Copy Link
- Report Inappropriate Content
On the contrary, Asus is a scam.They sell the AC53 with AC1200 specs, but the device is USB 2.0, so anything more than 480 Mbps is physically impossible.
- Copy Link
- Report Inappropriate Content
I have exactly the same issue on Windows 10 Pro x64 Update 2004. I followed all the hints posted here. Nothing works for me.
Send an email to the support with answers for questions posted by @Kathy_Z . I will let you know when I get any useful answer.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@BabyRain hello my friend.
TP Link d'ont care. Buy a asus or D Link dongle, like I did, and be happy.
- Copy Link
- Report Inappropriate Content
Confirming the same issue here :(
Slow wifi speed now and dropping connection every 5 mins or even more often. Tried provided drivers, disabling firewall - nothing helps, just annoying :(
- Copy Link
- Report Inappropriate Content
Hi there.
Yes, the issue started once Windows 10 had been updated to build no 1909
2.4Ghz wifi still works fine, without disconnects. just speed has dropped a bit
The router model is Genexis PURE-ED500.
I haven't tried to switch wifi channels, since the rest of the devices at home (phones, tablets, and laptops)work perfectly with both 2.4/5Ghz networks.
When connections drop - there is no connection at all to the wifi network and no error message displayed.
Thanks
- Copy Link
- Report Inappropriate Content
Information
Helpful: 1
Views: 14845
Replies: 23