EAP-245 poor 2.4Ghz performance
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hi, i'm experiencing really poor 2.4Ghz performance, anyone knows if theres a bug being worked on?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@blj-74 Seems like others started having this problem too: https://community.tp-link.com/en/business/forum/topic/206364
I've tried everything, restarts, etc. Seems like a new bug...
- Copy Link
- Report Inappropriate Content
Yeah, this is my performance when testing. On 5G i get terrific speed, but would expect aroung 50 mbit on 2.4G
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
The same issue on 2.4 Ghz - poor speed. EAP-225 and EAP-225-outdoor.
On 5Ghz - up to 90Mbit/s, on the same place and device on 2.4GHz - up to 10Mbit download speed (to the Internet).
On 2.4GHz very long ping - up to 50ms. with 5GHz - from 3 to 10 ms (to the local gateway mikrotik).
It is very strange..... It is happend after last EAP point firmware upgrade and EAP controller upgrade....
TP-Link do you have an fix ????
- Copy Link
- Report Inappropriate Content
Yeah, this is my first TP EAP device, might be my last, cuz this is a huge issue... If we could get an aknowldgement on the issue..
- Copy Link
- Report Inappropriate Content
@blj-74 this is usually due to interference on the 2.4GHz band. I had the same issue, and switching to a 5GHz-only network has fixed all of the issues that I was having.
see: https://community.tp-link.com/en/business/forum/topic/212296
- Copy Link
- Report Inappropriate Content
JeremyHiggs wrote
@blj-74 this is usually due to interference on the 2.4GHz band. I had the same issue, and switching to a 5GHz-only network has fixed all of the issues that I was having.
see: https://community.tp-link.com/en/business/forum/topic/212296
No, this performance is not due to interference. I can plug in my old router and perform many times better on the same channel.
- Copy Link
- Report Inappropriate Content
@JeremyHiggs it is not an interference ,because in my case eap has been installed in country house. There are no more wifi points or other clutter in this area.
- Copy Link
- Report Inappropriate Content
Issue with speed in 2.4 GHz still persist after upgrade controller to the v4.1.5 and eap225 (v3) and eap225_outdoor (v1) to the latest firmware. But the speed became a little higher. Previously, the speed was 5-10 Mbps, but now it is understood to be up to 12. Jitter is very high (No
Tp-link team, please check it again and fix the issue with speed in 2.4 GHz.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 8034
Replies: 29
Voters 0
No one has voted for it yet.