DECO M5 issues with CoAP messages
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hello,
couple of days ago I bought the M5 as I have a smart house with Shelly switches spreaded all over and using wifi.
As a hub I'm using Home Assistant on a rpi3. My M5 is also the router and my modem (DSL-225) is bridged.
I'm experiencing slowness issues with my Shelly devices on my Home Assistant as it seems the M5 is doing issues with CoAP messaging. I tried playing with the IGMP configuration on M5 with no luck. I get a 30-40 sec delays with my equipment which I didn't have before.
Can you please help solving the issue?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@Noami It seems to be fixed, received an update yesterday and it seems to be working fine now.
- Copy Link
- Report Inappropriate Content
@Noami Hello I experienced the exact same issue with a Deco P7 set. The problem is definitively in the Deco Firmware... as soon as I moved the shellys back to the old router the problem was solved. This is frustrating because I bought the P7 to be able to improve coverage all areas with shellys (IoT switches) in the first place, also the other reason for using the Deco was to support more clients, half of those 50+ wifi clients are shellys.
Please fix the CoAP support for your Deco devices. The IGMP setting (only available thorugh the web interface on the Deco) does not seem to make any difference. I have noticed that the CoAP issue does not affect devices connected to the main Deco... only those connected to the other APs.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@Sholofly I'm talking these days with TP support and tried a beta version they sent me with no luck.
Current option I found for now is connecting all the Shellies to the master node and prevent them from meshing to the slaves.
- Copy Link
- Report Inappropriate Content
@Noami how do I force it?
- Copy Link
- Report Inappropriate Content
@Sholofly pair them on the main node while others are disconnected. Then disable their mesh option and only then connect the other nodes to the power.
- Copy Link
- Report Inappropriate Content
@Noami How do i disable the mesh option?
- Copy Link
- Report Inappropriate Content
@Sholofly in the application. Per device.
- Copy Link
- Report Inappropriate Content
I am having the same issue, any news from TP-Link?
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 5566
Replies: 24
Voters 0
No one has voted for it yet.