Just Purchased Archer AX11000 Router Wifi Speeds
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
I recently purchased this amazing router however I cant seem to get full 2.5GBps for a second on my computer that is right next to it.
I have the channel width on 160mhz and set to ax only mode and I get 1.2gbps solid, I tested it on my phone as well also only 1.2 ( samsung Galaxy S20+)
The network card in my pc is Killer AX1650X
Any idea why
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Seeing that the service here is a joke here
I just want to respond to this I finally worked it out if anyone has a similar issue.
To get the 160MHz and AX top speed to stick you need to enable a DFS channel. I would recommended 120. Don't be in inpatient like me once you set a DFS channel give 5 - 10mins for it to come live after it searches to make sure there are no radars nearby. After that you good to go and you can connect at full 2.4 speeds.
- Copy Link
- Report Inappropriate Content
Sorry to hear the speed is not as good as expected, please help verify some details and we will try to fix it together:
1. May I know what is the bandwidth or speed you get from your ISP/modem? Kindly help test or check it first;
2. How did you test this speed via the router? Did you disconnect other devices from it and only leave the computer or phone performing the test? How about the wireless negotiation speed on the computer? Please verify it by referring to the instruction: https://www.tp-link.com/support/faq/2265/
3. Besides, you can refer to the instruction below to narrow down the issue.
What should I do if internet speed is slow when the device is connected to the TP-Link router?
Thanks in advance, and have a nice day.
- Copy Link
- Report Inappropriate Content
I am not discussing a internet speed test as that is irrelavant to me. I have 200MB line that it hits easily at it 1.2 sync speed.
I am talking about windows reporting the sync speed its 1.2gbps which is what upsets me.
- Copy Link
- Report Inappropriate Content
Still no response. Mind as well return it. Great service.
- Copy Link
- Report Inappropriate Content
Seeing that the service here is a joke here
I just want to respond to this I finally worked it out if anyone has a similar issue.
To get the 160MHz and AX top speed to stick you need to enable a DFS channel. I would recommended 120. Don't be in inpatient like me once you set a DFS channel give 5 - 10mins for it to come live after it searches to make sure there are no radars nearby. After that you good to go and you can connect at full 2.4 speeds.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 1864
Replies: 4
Voters 0
No one has voted for it yet.