Only 200mb Wifi Speed on 1gb line with Deco M4
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hi,
I have a 1gig fibre line.
Testing the line via my laptop, straight to the service providers box on the wall give me over 500mb/s however, as soon as I plug in my Deco M4, I get a max wifi speed of 196mb/s.
I'm under the impression the MR should give up to 1200mb/s.
What could be the issue?
Also, all my switches are gigabit switches...but cannot even over wired devices get more than 200mb/s.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@frogstomp You da man......it was set to 200 on both...
Has improved to 264mb.....already better but could be the area currently. .
Can you believe, this whole time.
👏👏👏👏👏👏👏 Thank you sir
- Copy Link
- Report Inappropriate Content
@Stani you have a 1200mb/s. and only got 180 mbs? i will not happy with that!!! i saw several post with same issue (including me) seems in spite of the decos cover your full house they offer poor bandiwthd quiality
i have a fibe libe 400/200 and only via wifi i can obtain 250/150 in spite of via cable i can get the full 400/200, worse is that i step just in front of the deco and via wifi i cant ger the 400.
For my disspointing/failure product due lot of people with same issue and no solution offered
Regards
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@mark-uk1 hi. Go into QoS
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@Stani . The same thing here. Ethernet almos 1 Gigabit... wifi: 240-250 :(
- Copy Link
- Report Inappropriate Content
jongarrido wrote
@Stani . The same thing here. Ethernet almos 1 Gigabit... wifi: 240-250 :(
These are maximum theoretical speeds you could get from Deco M4:
5 GHz: 867 Mbps (802.11ac)
2.4 GHz: 300 Mbps (802.11n)
240-250 is really good for device on WiFi 2.4GHz, but 5GHz device can do better. Turn off 2.4GHz in WiFi Settings in Deco app, for Main Network and for Guest Network (if Guest Network is enabled). See if your WiFi device can connect to 5GHz and if it'll get better speed.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 4197
Replies: 8
Voters 0
No one has voted for it yet.