801ND Bridge with AP
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
801ND Bridge with AP
Region : UnitedKingdom
Model : TL-WA801ND
Hardware Version : V2
Firmware Version : 3.13.30 Build 130121 Rel.69318n
ISP : Melita NET
Hi,
my set-up is currently as follows and the below behavior is noted, hence Bridge with AP mode is not working and I bought this AP specifically to use that particular feature
CORE ROUTER
Make: Expansys
IP: 192.168.2.1
Subnet: 255.255.255.0
DHCP: ENABLED
Security: WPA
Channel: 11
Signal: 20db
Key: same a AP Bridge
AP BRIDGE
Make: TP-LINK
Model: TL-WA801ND
Hardware Version: WA801N v2 00000000
Firmware Version: 3.13.30 Build 130121 Rel.69318n
Mode: Bridge with AP
IP: 192.168.2.254
Subnet: 255.255.255.0
Gateway: tried both 0.0.0.0 and 192.168.2.1
DHCP: DISABLED
Country: Malta
Channel: 11
WDS: DISABLED
Key: Same as Core Router
HOST
Windows 7 Pro
IP: Via DHCP
NOTED BEHAVIOR
CONNECTED TO AP BRIDGE VIA ETHERNET CONNECTION
ipconfig /renew from HOST - DOES NOT WORK
Ping 192.168.2.254 from 192.168.2.254 Web Interface - WORKS
Ping 192.168.2.1 from 192.168.2.254 Web Interface - WORKS
Ping 8.8.8.8 from 192.168.2.254 Web Interface - DOES NOT WORK
Ping 192.168.2.254 from HOST - WORKS
Ping 192.168.2.1 from HOST - DOES NOT WORK
Ping 8.8.8.8 from HOST - DOES NOT WORK
CONNECTED TO AP BRIDGE VIA WIRELESS CONNECTION
Same functionality as above
CONNECTED TO CORE ROUTER VIA WIRED OR WIRELESS CONNECTION
Every test specified above works fine
Thanks
Model : TL-WA801ND
Hardware Version : V2
Firmware Version : 3.13.30 Build 130121 Rel.69318n
ISP : Melita NET
Hi,
my set-up is currently as follows and the below behavior is noted, hence Bridge with AP mode is not working and I bought this AP specifically to use that particular feature
CORE ROUTER
Make: Expansys
IP: 192.168.2.1
Subnet: 255.255.255.0
DHCP: ENABLED
Security: WPA
Channel: 11
Signal: 20db
Key: same a AP Bridge
AP BRIDGE
Make: TP-LINK
Model: TL-WA801ND
Hardware Version: WA801N v2 00000000
Firmware Version: 3.13.30 Build 130121 Rel.69318n
Mode: Bridge with AP
IP: 192.168.2.254
Subnet: 255.255.255.0
Gateway: tried both 0.0.0.0 and 192.168.2.1
DHCP: DISABLED
Country: Malta
Channel: 11
WDS: DISABLED
Key: Same as Core Router
HOST
Windows 7 Pro
IP: Via DHCP
NOTED BEHAVIOR
CONNECTED TO AP BRIDGE VIA ETHERNET CONNECTION
ipconfig /renew from HOST - DOES NOT WORK
Ping 192.168.2.254 from 192.168.2.254 Web Interface - WORKS
Ping 192.168.2.1 from 192.168.2.254 Web Interface - WORKS
Ping 8.8.8.8 from 192.168.2.254 Web Interface - DOES NOT WORK
Ping 192.168.2.254 from HOST - WORKS
Ping 192.168.2.1 from HOST - DOES NOT WORK
Ping 8.8.8.8 from HOST - DOES NOT WORK
CONNECTED TO AP BRIDGE VIA WIRELESS CONNECTION
Same functionality as above
CONNECTED TO CORE ROUTER VIA WIRED OR WIRELESS CONNECTION
Every test specified above works fine
Thanks