AC1900 T9UH Can't Uninstall Driver

AC1900 T9UH Can't Uninstall Driver
AC1900 T9UH Can't Uninstall Driver
2020-09-20 18:14:58 - last edited 2020-09-22 10:33:22
Model:Adapter
Hardware Version: V2
Firmware Version: T9UH

I was having trouble locating my 5gH network after running setup.exe and installing the latest associated driver. I tried to uninstall said driver by deleting it via Device Manager without realizing there was a dedicated uninstall.exe. Now when I try re-running setup.exe to reinstall the driver, the setup app tells me I already have the driver installed. When I try to run uninstall.exe, it says the program cannot be found. Can anyone help me find a way to fully uninstall the driver so I can reinstall it properly.

0
0
#1
Options
2 Accepted Solutions
Re:AC1900 T9UH Can't Uninstall Driver-Solution
2020-09-22 10:33:15 - last edited 2020-09-22 10:33:22

@HonkRightNow 

Good day,

Thank you very much for your time and patience.

Please refer to the following instruction:

  1. Make sure the hardware of Archer T9UH has been detected;
  2. Check the device status per https://www.tp-link.com/support/faq/284/

If it said driver installed, please go to control panel>programs> check if there is any driver that you have download before;

You could un-install the driver and install it from the beginning;

 

Please also try to put windows into safe mode and turn off the firewall during the driver installation;

https://www.tp-link.com/support/faq/791/

 

Thank you very much.

Best Solution
0
0
#2
Options
Re:AC1900 T9UH Can't Uninstall Driver-Solution
2020-09-23 23:08:27 - last edited 2020-09-23 23:08:49

@HonkRightNow I had to use a third party uninstaller to find additional files that I neglected to delete. Only then was I able to rerun setup.exe. 

Best Solution
0
0
#3
Options
2 Replies
Re:AC1900 T9UH Can't Uninstall Driver-Solution
2020-09-22 10:33:15 - last edited 2020-09-22 10:33:22

@HonkRightNow 

Good day,

Thank you very much for your time and patience.

Please refer to the following instruction:

  1. Make sure the hardware of Archer T9UH has been detected;
  2. Check the device status per https://www.tp-link.com/support/faq/284/

If it said driver installed, please go to control panel>programs> check if there is any driver that you have download before;

You could un-install the driver and install it from the beginning;

 

Please also try to put windows into safe mode and turn off the firewall during the driver installation;

https://www.tp-link.com/support/faq/791/

 

Thank you very much.

Best Solution
0
0
#2
Options
Re:AC1900 T9UH Can't Uninstall Driver-Solution
2020-09-23 23:08:27 - last edited 2020-09-23 23:08:49

@HonkRightNow I had to use a third party uninstaller to find additional files that I neglected to delete. Only then was I able to rerun setup.exe. 

Best Solution
0
0
#3
Options